Fluke 772 Specifications

Download Specifications of Fluke 772 Measuring Instruments for Free or View it Online on All-Guides.com.

Brand: Fluke

Category: Measuring Instruments

Type: Specifications

Model: Fluke 772 , Fluke 773

Pages: 2 (1.34 Mb)

Download Fluke 772 Specifications

Fluke 772 Specifications - Page 1
1
Fluke 772 Specifications - Page 2
2
Technical Data
Fluke 772 and 773
Milliamp Process
Clamp Meters
Use the Fluke 772 and 773 to:
Measure 4 to 20 mA signals without ”breaking the
loop” just like the innovative and popular Fluke 771
Process Milliamp Clampmeter
Source 4 to 20 mA signals for testing control
system I/O or I/Ps
Simulate 4 to 20 mA signals for testing control
system I/O
Measure 4 to 20 mA signals with in-circuit
measurement
Simultaneously measure mA in-circuit with 24 V
loop power for powering and testing transmitters
Source mA output signals in a linear ramp or 25 %
step output
Automatically change the 4 to 20 mA output for
remote testing
Power saving features, auto-off, backlight timeout
extend battery life
Fluke 773 features:
DC voltage measurement to verify 24 V power
supplies or voltage I/O signals
Source dc voltage to test input devices that accept
a 1 to 5 volt or 0 to 10 volt signal
Scaled mA output provides a continuous mA signal
that corresponds to the 4 to 20 mA signal measured
by the mA clamp
Output mA signal enables a logging DMM or
other device to record the 4 to 20 mA signal
without breaking the loop
mA in/out: simultaneously measure the mA signal
with the clamp and source a mA signal
Apply a mA input signal to a device and measure
its’ 4 to 20 mA output on devices such as valves
or mA isolators
Voltage output linear ramp or 25 % step output
Automatically change the voltage output for
remote testing
Get more time.