Fostex VF16 Quick Start
Download Quick start of Fostex VF-16 CD Player, Cyclometer for Free or View it Online on All-Guides.com.
Brand: Fostex
Category: CD Player , Cyclometer , Recording Equipment , Software , Storage
Type: Quick start for Fostex VF-16
Pages: 2 (0.04 Mb)
1
2
VF-16 QUICK START – DIRECT METHOD RECORDING
With this method, the 8 mic/line inputs at the top of the VF16 feed tracks 1 – 8 respectively. These inputs
can also be set to feed tracks 9 – 16 (described later).
PRIOR TO RECORD:
Since Program 1 (PGM-1) is a record-protected demo, you must first exit PGM-1 prior to recording and
disable record protect.
1. Press the PGM SEL button
2. Using the JOG wheel, turn until display reads “NEW PGM?”
3. Press the ENTER button *Note: From here you can name your program and press
ENTER ….or…. to skip simply press EXIT.
4. Using the JOG wheel, turn until display reads “REC PROTECT”. Press ENTER. Turn JOG
for display to read “OFF”. Press ENTER. Press EXIT.
At the top of the VF16 there are 8 mic/line mixer inputs: A, B, C, D, E, F, G, and H
The audio levels for these mixer inputs are controlled using the bottom row of channel faders also labeled
A, B, C, D, E, F, G, and H. These faders are always used to set your record levels.
TO START RECORDING
For the following example let’s record on Track 1. Using Input A.
1. Connect your audio signal to Input A (labeled “1/9/A”) at the top of the VF16
2. Press REC TRK (direct)
3. Press the CH SEL #1 button (above FADER#1).
a. Display now reads “ RDY” underneath 1
b. Press EXIT
4. Press the RECORD button only. It should now be blinking
5. Adjust your record level using FADER A (Bottom Row #9)