American Dynamics Intellex RMS Install Manual

Download Installation note of American Dynamics Intellex RMS Storage for Free or View it Online on All-Guides.com.

American Dynamics Intellex RMS Installation note - Page 1
1
American Dynamics Intellex RMS Installation note - Page 2
2
American Dynamics Intellex RMS Installation note - Page 3
3
American Dynamics Intellex RMS Installation note - Page 4
4
American Dynamics Intellex RMS Installation note - Page 5
5
American Dynamics Intellex RMS Installation note - Page 6
6
American Dynamics Intellex RMS Installation note - Page 7
7
American Dynamics Intellex RMS Installation note - Page 8
8
Intellex® RMS Installation Note
English
Intellex
®
RMS
Installation Note
READ THIS BEFORE INSTALLING THE RMS!
NOTE: This note adds or corrects information in the Intellex
RMS Installation and Operating Instructions. In case
of conflict, this note replaces information in those
manuals.
NOTE: Default recording mode changed to circular. Note
that the default Intellex 3.1 recording mode has been
changed from linear to circular. To change the
recording mode, click the Setup button, then the
Record Mode button. In the Record Mode dialog box,
select either Linear or Circular.
Connect the Mouse
You must connect the mouse cable to the upper PS/2-style con-
nector (#4 in Figure 1 below) on the rear of the unit. The lower
PS/2-style connector (#5 in Figure 1) is for a keyboard
(optional).
Connect the VGA Monitor
The monitor must be connected to the VGA connector (#11 in
Figure 1).