Tripp Lite SR25UB Specifications

Download Specification sheet of Tripp Lite SR25UB Computer Accessories, Enclosure for Free or View it Online on All-Guides.com.

Brand: Tripp Lite

Category: Computer Accessories , Enclosure , Network Card

Type: Specification sheet for Tripp Lite SR25UB

Pages: 4 (0.13 Mb)

Download Tripp Lite SR25UB Specification sheet

Tripp Lite SR25UB Specification sheet - Page 1
1
Tripp Lite SR25UB Specification sheet - Page 2
2
Tripp Lite SR25UB Specification sheet - Page 3
3
Tripp Lite SR25UB Specification sheet - Page 4
4
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
Model Number: SR25UB
25U SmartRack Premium Enclosure (includes doors and side panels)
Highlights
Ships fully assembled
Standard 24" width (600mm)
Standard 42" depth (1050mm)
4 interior vertical posts with non-threaded square hole openings
3000 lb stationary / 2250 lb rolling load capacity
Locking, removable, reversible front and rear doors
Locking, removable side panels
Includes equipment mounting hardware
Meets all enclosurerequirements towards PCI DSS (Payment Card Industry
Data Security Standard)compliance
Description
Tripp Lite’s SR25UB premium SmartRack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack
equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical
mounting rails and more. And as part of the SmartRack family, the SR25UB is compatible with Tripp Lite’s extensive range of rackmount
accessories, enabling you to customize your solution to meet any requirement. The SR25UB ships fully assembled for quick installation and comes
with a 5-year warranty.
The SR25UB has 25U of capacity and is compatible with all standard 19-inch rack equipment. The front and rear pairs of vertical rails feature square
mounting holes and are numbered by rack space for easy reference. The rails are adjustable in quarter-inch increments to accommodate equipment
depths from 4 to 37 inches. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws.
The rails feature square mounting holes and are capable of supporting up to 3000 lb of equipment with included installation hardware (2250-lb
rolling capacity).
With a locking, reversible front door and locking, removable side panels, SR25UB provides safe, secure installation for all equipment. This prevents
unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment
replacement. The enclosure meets all requirements toward PCI DSS compliance.
The top and bottom panels of the SR25UB are furnished with vents designed to help remove warm air from the enclosure and draw in cool air by
convection. They also support installation of standard user-supplied case fans (Tripp Lite SRFANROOF). The top and bottom panels are also
provided with ports for cable routing.
To simplify deployment, the SR25UB comes with casters that enable it to be maneuvered into to desired location, and then secured in place by
adjusting the unit’s levelers. Note: the casters are intended for minor position adjustments within the final installation area only and are not designed
for moving the enclosure over long distances.
Package Includes
SR25UB Rackmount Enclosure
(2) Side panels
(2) Side panel locks
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
(2) Door & side panels
Owner's Manual
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4" increments. The easy-view depth index ensures consistent rail placement
without requiring time-consuming measurements