American Standard CHAMPION 2002 Product User Manual

Download Installation and care manual of American Standard CHAMPION 2002 Indoor Furnishing, Personal Care Products for Free or View it Online on All-Guides.com. This version of American Standard CHAMPION 2002 Manual compatible with such list of devices, as: CHAMPION 2586.000ST, 2367, 2369, 2585, 3186

American Standard CHAMPION 2002 Installation and care manual - Page 1
1
American Standard CHAMPION 2002 Installation and care manual - Page 2
2
American Standard CHAMPION 2002 Installation and care manual - Page 3
3
American Standard CHAMPION 2002 Installation and care manual - Page 4
4
American Standard CHAMPION 2002 Installation and care manual - Page 5
5
SAVE FOR FUTURE USE
730529-100 Rev. U
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2011
RECOMMENDED TOOLS AND MATERIALS
Putty Knife Regular Screwdriver Adjustable Wrench Sealant
Hacksaw Wax Ring/Gasket Flexible Supply Tube 1/2" Deep Well Nut Driver or
Closet Bolts Tape Measure Carpenters Level Deep Well Socket Wrench
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
1
Recommended fitting type for back-to-back installations.
Depending upon your plumbing and venting conditions, the flow from
the Champion in a back-to-back installation may create a vacuum on
the system and draw water from the opposing bowl. The National
Standards Plumbing Code prohibits the use of a cross fitting for
drainage as throw over is possible. The code does approve a
directional "Y" style fitting with proper venting to direct the water
downward and away from the other toilet.
NOTE: BACK-TO-BACK INSTALLATION
Doral Classic
Champion
®
4 2-piece Toilets
Models - 2058, 2074, 2076, 2473
Doral Classic
Champion
®
4 2-piece Toilets
Models - 2367, 2368, 2369, 2443
Oakmont
Champion
®
4 2-piece Toilets
Models - 2625, 2627, 2738
Townsend
Champion
®
4 2-piece Toilets
Models - 2733, 2735
Champion
®
4 2-piece Toilets
Models - 2002, 2018, 2023, 2414, 2585,
2792, 2586, 2793, 3186, 3404
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this
product is installed properly, please read these instructions carefully before you begin. (Certain installations
may require professional help.) Also be sure your installation conforms to local codes.
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
!