Frigidaire GLMB186K Install Manual

Download Installation instructions of Frigidaire GLMB186K Microwave Oven for Free or View it Online on All-Guides.com.

Brand: Frigidaire

Category: Microwave Oven

Type: Installation instructions for Frigidaire GLMB186K

Pages: 4 (0.14 Mb)

Download Frigidaire GLMB186K Installation instructions

Frigidaire GLMB186K Installation instructions - Page 1
1
Frigidaire GLMB186K Installation instructions - Page 2
2
Frigidaire GLMB186K Installation instructions - Page 3
3
Frigidaire GLMB186K Installation instructions - Page 4
4
PART QUANTITY
Trim Frame 1
Bottom Duct 1
Side Duct 1
1” Screws 6
(4 required, 2 extra)
1
2” Screws 15
(11 required, 4 extra)
Anti-Tip Bracket 1
Bottom Bracket 1
Upper Duct 1
Template 1
Questions? In the U.S., call 1-800-944-9044. In Canada, call 1-866-213-9397 (English),
1-800-669-4606 ext. 8199 (French).
Visit our Website at:
www.frigidaire.com
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
.
Installation Built-In Trim Kits
Instructions
82-1827 and 82-1830
Phillips screwdriver
Pencil
Tape measure
Awl or punch
Drill with
7
64bit or #35
1
164D3370P160
49-40169-1
P/N 316137209 Rev. A
Printed in Korea (05-01 JR)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
Save these
instructions for local inspector’s use.
IMPORTANT
Observe all
governing codes and ordinances.
Note to Installer
Be sure to leave these
instructions with the Consumer.
Note to Consumer
Keep these
instructions for future reference.
Unplug the microwave oven before attempting
installation of this kit.
Skill level Installation of this appliance requires basic
mechanical and electrical skills.
Completion time – 1-3 hours
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
This kit is UL and CUL listed for installation alone or
over any Frigidaire single electric wall oven.
FOR YOUR SAFETY:
WARNING
Before beginning the
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.
TOOLS YOU WILL NEED
PARTS INCLUDED