Frigidaire DGUS2645LF Care Manual

Download Installation instructions of Frigidaire DGUS2645LF Refrigerator for Free or View it Online on All-Guides.com. This version of Frigidaire DGUS2645LF Manual compatible with such list of devices, as: FFHS2313LM, FFHS2622MH, FGHS2332LP, FGUS2676LP, FRT21S6JB - 20.5 cu. Ft. Top-Freezer Refrigerator

Brand: Frigidaire

Category: Refrigerator

Type: Installation instructions

Model: Frigidaire DGUS2645LF , Frigidaire FFHS2311L , Frigidaire FFHS2311LB , Frigidaire FFHS2311LQ , Frigidaire FFHS2311LW , Frigidaire FFHS2313L , Frigidaire FFHS2313LE , Frigidaire FFHS2313LM , Frigidaire FFHS2313LP , Frigidaire FFHS2313LS , Frigidaire FFHS2322M S , Frigidaire FFHS2322MB , Frigidaire FFHS2322MM , Frigidaire FFHS2322MQ , Frigidaire FFHS2322MS , Frigidaire FFHS2322MW , Frigidaire FFHS2611L , Frigidaire FFHS2611LB , Frigidaire FFHS2611LQ , Frigidaire FFHS2611LS , Frigidaire FFHS2611LW , Frigidaire FFHS2612LS , Frigidaire FFHS2622M S , Frigidaire FFHS2622MB , Frigidaire FFHS2622MH , Frigidaire FFHS2622MM , Frigidaire FFHS2622MQ , Frigidaire FFHS2622MS , Frigidaire FFHS2622MW , Frigidaire FFSC2323L , Frigidaire FFSC2323LE , Frigidaire FFSC2323LP , Frigidaire FFSC2323LS , Frigidaire FFUS2613LE , Frigidaire FFUS2613LM , Frigidaire FFUS2613LP , Frigidaire FFUS2613LS , Frigidaire FGHC2334KP - Gallery 22.6 Cu. Ft. Side , Frigidaire FGHC2335LE , Frigidaire FGHC2335LP , Frigidaire FGHC2342LF , Frigidaire FGHC2344K - Gallery 22.6 cu. Ft. Refrigerator , Frigidaire FGHC2345LF , Frigidaire FGHC2355PF , Frigidaire FGHC2378LE , Frigidaire FGHC2378LP , Frigidaire FGHC2379KE - 22.6 cu. ft , Frigidaire FGHS2332LE , Frigidaire FGHS2332LP , Frigidaire FGHS2334K - Gallery 23.0 cu. Ft. Refrigerator , Frigidaire FGHS2334KE - Gallery 23 Cu. Ft. Side , Frigidaire FGHS2334KW - Gallery 23 Cu. Ft. Side , Frigidaire FGHS2342LF , Frigidaire FGHS2367KB - Gallery: 22.60 cu. Ft. Refrigerator , Frigidaire FGHS2367KP - Gallery 22.6 cu. Ft. Refrigerator , Frigidaire FGHS2368LE , Frigidaire FGHS2368LP , Frigidaire FGHS2369KP - Gallery 23' Dispenser Refrigerator , Frigidaire FGHS26 - Gallery 26.0 cu. Ft. Refrigerator , Frigidaire FGHS2631P ?E , Frigidaire FGHS2631P F? , Frigidaire FGHS2631PP , Frigidaire FGHS2634KB - Gallery 26 cu. Ft. Refrigerator , Frigidaire FGHS2644K - Gallery 26.0 cu. Ft. Refrigerator , Frigidaire FGHS2655KE - Gallery 26 Cu. Ft. Refrigerator , Frigidaire FGHS2667KW - Gallery 26 Cu. Ft. Side , Frigidaire FGHS2669KE - Gallery 26' Dispenser Refrigerator , Frigidaire FGUS2632LE , Frigidaire FGUS2632LP , Frigidaire FGUS2635LE , Frigidaire FGUS2635LP , Frigidaire FGUS2637LE , Frigidaire FGUS2637LP , Frigidaire FGUS2642LF , Frigidaire FGUS2645LF , Frigidaire FGUS2647LF , Frigidaire FGUS2676LP , Frigidaire FPHC2398LF , Frigidaire FPHS2386LF , Frigidaire FPHS2399KF - Professional , Frigidaire FPUS2686LF , Frigidaire FPUS2698LF , Frigidaire FRS3HF55KQ - 22.6 cu. Ft. Refrigerator , Frigidaire FRS3HF55KS - 22 6 CF PURES CRUSH CUBE WATE3 SPILLSHLVS CLEAR DAIRY DELI , Frigidaire FRS3HF55KW - Gallery 22.6 cu. Ft. Refrigerator , Frigidaire FRS3HR35KS , Frigidaire FRS6HF55KQ - 26 Cu Ft Refrigerator , Frigidaire FRS6R3JB - 26.0 cu. Ft. Refrigerator , Frigidaire FRS6R3JW , Frigidaire FRT21S6JB - 20.5 cu. Ft. Top-Freezer Refrigerator , Frigidaire Gallery DGUS2635LE , Frigidaire Gallery DGUS2635LP , Frigidaire Gallery FGHC2335L , Frigidaire Gallery FGHS2332L , Frigidaire Gallery FGUS2632L

Pages: 2 (1.03 Mb)

Download Frigidaire DGUS2645LF Installation instructions

Frigidaire DGUS2645LF Installation instructions - Page 1
1
Frigidaire DGUS2645LF Installation instructions - Page 2
2
This document should only be removed by customer after installation.
P/N: 241811505
Not satised with the installation of your refrigerator? Please contact the store you purchased it from.
Installation Instructions for Side-by-Side Refrigerator
2
3
To connect the water supply to the rear of your refrigerator:
1 Ensure that the refrigerator is not plugged in.
2 Flush the supply line until water is clear by placing the end of the
copper tube in a sink or bucket and opening the shut-off valve.
3 Remove the plastic cap from the water valve inlet at the rear of
your refrigerator. Discard the cap.
4 Slide the brass compression nut, then the ferrule (sleeve) onto
copper tube.
5 Push the copper tube into water valve inlet as far as it will go
(
1
/
4
inch).
6 Slide the ferrule (sleeve) into valve and nger-tighten the
compression nut onto valve. Tighten another half turn with a
wrench. Do not over-tighten.
7 Secure the copper tube to your refrigerator’s rear panel with a
steel clamp and screw (see illustration).
8 Coil the excess copper tubing (about turns) behind your
refrigerator as shown. Arrange coiled tubing to avoid vibration or wear against other surfaces.
9 Open water supply shut-off valve and tighten any connections that leak.
5
(continued)
6
7
1
4
5
8
Doors
Door seals completely to cabinet on all
sides
Doors are level
Leveling
Refrigerator is level, side to side and tilted
1/4” (6mm) front to back
Toe grille is properly attached to
refrigerator
Cabinet is sitting solid on all corners
Electrical Power
House power turned on
Refrigerator plugged in
Ice Maker
House water supply connected to
refrigerator
No water leaks present at all connections
- recheck in 24 hours
Ice Maker is turned ON.
Ice & Water Dispenser operates correctly
Front lter must be ush with lter
housing (some models)
Final Checks
Shipping material removed
Fresh Food and Freezer temperatures set
Crisper Humidity controls set
Registration Card sent in
Installation Checkoff List
Prepare The Installation Site
Transport Unpackaged Refrigerator To Site
Your refrigerator is designed to be part of a built-
in kitchen cabinet system. Be sure to coordinate
site preparation and installation with your kitchen
contractor. Include these minimum guidelines in your site
preparation:
Choose a place near a grounded electrical outlet.
Do not use an extension cord or an adapter plug.
Avoid direct sunlight and close proximity to a range,
dishwasher or other heat source.
Floor should be level and able to support a fully
loaded refrigerator.
The refrigerator’s Ice & Water Dispenser requires
water supply access.
Plan for easy access to counter tops when
removing food.
For complete access to drawers and freezer
baskets, doors must be able to fully open.
Allow the following clearances for ease of installation, proper air circulation, and plumbing and
electrical connections: Sides & Top: 3/8 inch / Rear: 1 inch
By now, you have already removed your refrigerator’s shipping carton.
You may still need to use a hand truck to move it through close spaces or
entrances. If the refrigerator is larger than an entrance, consider two options:
Remove the entrance door if one exists.
Remove the refrigerator doors (see how in your Use & Care Guide).
When using a hand truck:
Load refrigerator from side of cabinet only.
Do not run retaining straps over handles.
Do not over-tighten retaining straps.
Never use refrigerator handles to move the
refrigerator.
Remove tape from doors only after unit is in place.
Connect Water Supply
What you will need:
Access to a cold
water line with
pressure of
30-100 psi.
Copper tubing
with ¼-inch
(6.4mm) OD.
Length for this tubing is the distance
from the rear of the refrigerator to your
household water supply line plus 7
feet (2.1 meters).
A shut-off valve for the connection
between your household water line and
the refrigerator supply line. Do not use
a self-piercing shut-off valve.
A compression nut and ferrule (sleeve)
for the water supply connection at the
rear of your refrigerator.
Place In Permanent Position
If possible, use a hand truck to position the refrigerator directly in front of its cabinet enclosure.
Be careful not to move the refrigerator beyond its water supply (copper tubing) connections.
Plug in the power cord, and push the refrigerator
straight back into place.
Level Refrigerator & Adjust Doors (if necessary)
Problems? Try These Suggetions
What’s Next?
Congratulations. You are ready to begin enjoying your new refrigerator.
To become aware of important safety instructions and learn how to operate your
refrigerator, please read the entire Use & Care Guide.
You may want to start with the “Normal Operating Sights & Sounds” section of the Guide to
learn more about what to expect during typical operation.
Please register your product. You can register online at www.electroluxusa.com. or you can
simply send in the Registration Card.
And thank you for choosing Frigidaire.
WARNING
To avoid electric shock, which can cause death or severe personal injury, do not connect your
refrigerator to an electrical power source until you have completed Step 3 of these instructions.
CAUTION
Room temperatures below 55°F
(13°C) or above 110°F (43°C)
will impair cooling ability of your
refrigerator’s compressor.
IMPORTANT
If you are installing your refrigerator without
connecting it to a water supply, make sure the ice
maker’s power switch is turned Off (see the Use &
Care Guide for more details).
NOTE
These installation instructions
are provided only as a possible
customer option. We recommend
that you use a service or kitchen
contracting professional to install
your refrigerator.
NOTE
Information about cabinetry
construction for your new appliance
is available for contractors. Call
1-877-435-3287.
CAUTION
Shifting the refrigerator from side to
side may damage ooring.
NOTE
Kit #53039117950, available from your dealer,
provides all materials for a water supply
installation, including 25 feet of copper tubing and
full instructions.
CAUTION
To avoid property damage:
• Use copper tubing for the water supply line (plastic
tubing is more likely to leak).
• Ensure water supply complies with local
plumbing codes.
CAUTION
• Shifting the refrigerator from side
to side may damage ooring.
• Do not block the toe grille on the
lower front of your refrigerator.
Sufcient air circulation is essential
for proper operation.
NOTE
The ice maker’s ll valve may operate noisily if the household water supply is shut off.
• After ensuring no water leaks exist at any connection, be sure to check for leaks again in 24 hours.
See your Use & Care Guide for detailed information about setting up and operating the Ice &
Water Dispensing system.
1
2
3
Hinge
Flange
Set Screw
(some models)
Door Stop
Flange
Hinge
Open Door
7/16Wrench
and 3/32” Hex Key
(some models)
4
To level the doors using the adjustable lower hinge (Type 2 without set screw)
1 If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning
the adjustment screw clockwise using a
7
/
16
inch wrench. (See illustration 3.)
2 If the freezer door is lower than the refrigerator door, raise the freezer door by turning the
adjustment screw clockwise using a
7
/
16
inch wrench. (See illustration 3.)
3 After leveling, verify door stop contacts lower hinge and top of door does not contact upper
hinge through full movement of door (from fully closed to
fully open). (See illustration 5.)
4 To replace the toe grille, open both doors. Slide left and
right sides of toe grille over lower hinges of refrigerator.
While pushing toe grille rmly against cabinet, fasten
bottom clips of toe grille to cabinet. Fasten top clips to
cabinet. Close the doors. Fasten right and left side clips
into groove of bottom hinge.
Guidelines for nal positioning of your refrigerator:
All four corners of the cabinet must rest rmly on the oor.
The cabinet should be level at the front and rear.
The sides should tilt ¼-inch (6 mm) from front to back (to
ensure that doors close and seal properly).
Doors should align with each other and be level.
To level the cabinet using the front rollers:
1 With both doors closed, unfasten right and left side clips
of toe grille from bottom hinge groove Open both doors.
Press rmly on top of toe grille until top of toe grille pops
off. Pull toe grille outward toward your body and off of lower hinges.
(See illustration 1.)
2 Close the doors and use a at-blade screwdriver or
3
/
8
inch socket wrench to raise or lower the front rollers. (See
illustration 2.)
3 Ensure both doors are bind-free with their seals touching the
cabinet on all four sides.
To level the doors using the adjustable lower hinge (Type 1
with set screw):
1 Before leveling either door, remove set screw that locks door height into position. (The door
cannot be adjusted without set screw removed.)
2 If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning
the adjustment screw clockwise using a
7
/
16
inch wrench. (See illustration 3.)
3 If the freezer door is lower than the refrigerator door, raise the freezer door by turning the
adjustment screw clockwise using a
7
/
16
inch wrench. (See illustration 3.)
4 After leveling, verify door stop contacts lower hinge and top of door does not contact upper
hinge through full movement of door (from fully closed to fully open). (See illustration 4.)
5 Reinstall set screw, locking the door height.
6 To replace the toe grille, open both doors. Slide left and right sides of toe grille over lower
hinges of refrigerator. While pushing toe grille rmly against cabinet, fasten bottom clips of
toe grille to cabinet. Fasten top clips to cabinet. Close the doors. Fasten right and left side
clips into groove of bottom hinge.
5
Operation problems are possible if any of the installation tasks are not completed. Here is a list
of things to check for:
Is the refrigerator’s power cord plugged in?
Is the refrigerator connected to the household water supply?
If you had to remove the refrigerator and freezer doors, did you reattach water and power
connectors at the door hinges? (See the Use & Care Guide for detailed instructions on
removing and replacing doors.)
Is the ice maker power switch turned On?
Other possibilities to check:
Is the power to the receptacle turned on?
Is the water lter above the fresh food compartment fully seated (see Use & Care Guide for details)?
If you still have operation problems after checking these suggestions, please see the “Solutions
To Common Problems” section in your Use & Care Guide.