• Home
• Brands
• AMX Manuals
• AMX NXD-CV12
• AMX Firmware version G4 Quick Start Manual

AMX Firmware version G4 Quick Start Manual

Download Quick start manual of AMX NXD-CV12 Software, Touch Panel for Free or View it Online on All-Guides.com. This version of AMX NXD-CV12 Manual compatible with such list of devices, as: NXD-CV12, NXD-CV15, NXT-CV12, Firmware version G4, CB-TP15

1

2

Quick Start Guide

12" and 15"

Modero Color Video Touch Panels (Firmware version G4)

For more detailed installation, configuration, programming, file transfer, and

operating instructions, refer to the 12" and 15" Modero Touch Panel Series

Instruction Manual, available on-line at www.amx.com.

ATTENTION!

Verify you are using the latest NetLinx Master Firmware (available from

www.amx.com) on your ME260/64 and NI-Series Controllers. Verify the

TPDesign4 program being used is Version 2.4 or higher.

Overview

The 12" (NXT/NXD-CV12) and 15" (NXT/NXD-CV15) Video panels are

4th generation graphics touch panels that provide richer colors and crisper

contrast than any panels currently on the market.

Modero tilt panels now come with an optional NXA-BASE/B battery base

that allows it to function off the collective charge of two internal

NXT-BP batteries that can be charged either in the base or in an optional

NXT-CHG charger.

Specifications

NXA-AVB A/V Breakout Box

FIG. 2 shows the front and rear connectors on the Breakout Box.

Connections and Wiring

FIG. 3 shows the layout of the connectors (located on the rear of the base

on the NXT and on the left side panel of the NXD panels).

Power Connection

A PSN4.4 or PSN6.5 Power Supply can indirectly supply power to the

Modero panels via the NXA-AVB Breakout Box. FIG. 4 shows a sample

wiring configuration using both an indirect or direct PSN power connection

for a CV Modero Panel.

FIG. 1 Sample Wall Mount and Table Top CV Touch Panels

Modero CV Specifications

Dimensions (HWD):

NXT-CV15

(FG2252-11)

NXD-CV15

(FG2253-12)

CB-TP15

(FG032-10)

• 12.94" x 14.95" x 11.73" (32.87 cm x 37.97 cm x 29.78 cm)

Fully lowered height: 7.45" (18.92 cm)

• Decor faceplate included: 14.37" x 15.20" x 3.31"

(36.50 cm x 38.61 cm x 8.40 cm)

• Conduit/wallbox: 13.48" x 14.18" x 3.49"

(34.24 cm x 36.00 cm x 8.85 cm) (optional)

Dimensions (HWD):

NXT-CV12

(FG2250-11)

NXD-CV12

(FG2251-12)

CB-TP12

(FG031-10)

• 10.91" x 12.34" x 12.50" (27.70 cm x 31.33 cm x 31.75 cm)

Fully lowered height: 6.77" (17.20 cm)

• Decor faceplate included: 12.38" x 12.59" x 3.25"

(31.43 cm x 31.97 cm x 8.25 cm)

• Conduit/wallbox: 11.52" x 11.60" x 3.50"

(29.27 cm x 29.47 cm x 8.89 cm) (optional)

Power Requirements

(CV12):

• Constant current draw: 2.04 A @ 12 VDC (stand-alone)

• Startup current draw: 3.0 A @ 12 VDC (stand-alone)

Power Requirements

(CV15):

• Constant current draw: 3.45 A @ 12 VDC (stand-alone)

• Startup current draw: 5.1 A @ 12 VDC (stand-alone)

Minimum power

supply required:

• CV12: requires a PSN4.4 Power Supply (FG423-45)

- using accessories can increase the power draw requirements

• CV15: requires a PSN6.5 Power Supply (FG423-41)

- using accessories can increase the power draw requirements

Memory: • 64 MB SDRAM (upgradable to 256 MB)

• 64 MB Compact Flash (upgradable to 1 GB factory programmed)

Resolutions: • 12" panels: 800 x 600 pixels

• 15" panels: 1024 x 768 pixels

Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment of

the panel brightness

• Motion Sensor (PIR): Proximity Infrared Detector to wake the panel

when panel is approached

• Sleep Button: Pushbutton (grey) used to either put the panel into a

"sleep" or "wake" state

• Microphone: Used for intercom applications

• Speakers: Frequency response 450 Hz - 7 KHz

Rear Connectors: • PCMCIA Card Slot: Provides wireless connectivity (with upgrade)

• Stereo Ouput Connector: Stereo output through a 3.5mm mini-jack

(for use with external speakers or headphones)

• Audio/Video Connector: RJ-45 connection for A/V signals between the

NXA-AVB Breakout Box and the panel

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication

• ICSNet Connector: RJ-45 connection for ICSNet interface

NXD panel

NXT panel

(Wall Mount)

(Table Top)

Modero CV Specifications (Cont.)

Operating /Storage

Environments:

• Operating Temperature: 10° C (50° F) to 40° C (104° F)

• Operating Humidity: 20% - 85% RH

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

• Storage Humidity: 5% - 85% RH

NXA-AVB:

A/V Breakout Box:

FG2254-01 (FIG. 2)

• Included accessory with CV12 and CV15 panels

• Provides video/audio distribution to the A/V panel over CAT5 cable

(up to 200’/60.96 m) and accepts either Composite or S-Video

Supported Audio

Sample Rates:

• 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,

12000Hz,11025Hz, and 8000Hz.

Included

Accessories:

• Installation Kit for 12"/15" panels (KA2250-02):

- One 2-pin mini-Phoenix connector (41-5025) and

- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)

• Modero Table Top Cable (CA2250-50) provided with all NXT panels.

Optional

Accessories:

• CB-TP12 Conduit/Wallbox (FG031-10)

• CB-TP15 Conduit/Wallbox (FG032-10)

• MB-TP12 Universal VESA Mounting Box (FG031-50):

- One strain relief grommet (45-0004-03)

- One black metallic VESA back box (62-0031-50)

- One black plastic cover (with grommet opening) (60-0031-50)

- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)

- Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139)

• MB-TP15 Universal VESA Mounting Box (FG032-50):

- One strain relief grommet (45-0004-03)

- One black metallic VESA back box (62-0032-50)

- One black plastic cover (with grommet opening) (60-0032-50)

- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)

- Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139)

• NXA-BASE/B Battery Base Kit (FG2255K)

1 battery base (FG2255) and 2 NXT-BP batteries (FG2255-10)

• NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50)

• NXA-RK15 Rackmount kit for 15" Wall Mount panels (FG2904-51)

• NXA-WC80211b, 802.11B Wireless Card (FG2255-02)

• NXT-CHG Kit (FG2250-50K):

1 charger (FG2250-50) and 2 NXT-BP batteries (FG2255-10)

• PSN4.4 Power Supply (12 VDC) (FG423-45)

• PSN6.5 Power Supply (12 VDC) (FG423-41)

• Upgrade SDRAM memory:

NXA-EXM128M - 128 MB memory card (FG079-01)

NXA-EXM256M - 256 MB memory card (FG079-02)

• Upgrade Compact Flash (factory programmed with firmware):

NXA-CFTP128M - 128 MB compact flash card (FG2116-22)

NXA-CFTP256M - 256 MB compact flash card (FG2116-23)

NXA-CFTP512M - 512 MB compact flash card (FG2116-24)

NXA-CFTP1GB - 1 GB compact flash card (FG2116-25)

FIG. 2 Connector layouts on the NXA-AVB Breakout Box (included)

FIG. 3 Connector layout on the CV Touch Panels

Power In

(front)

ICSNet (to panel)

Audio/Video

Power (to panel)

S-Video Chroma

Composite/

Mic Out

Audio

In

ICSNet In

S-Video

Luma

(rear)

(to panel)

VIDEO

AUDIO /

LA

10/100

ETHERNET

12VDC

PWR

ICSNet

Audio-Video from NXA-AVB

(CAT5)

Cardbus slot

PCMCIA/

Stereo Output

Ethernet (CAT5)

ICSNet

(CAT5)

Power