Fujitsu Primergy RX300 S4 Start Manual
Download Start manual of Fujitsu Primergy RX200 S4 Server for Free or View it Online on All-Guides.com.
Brand: Fujitsu
Category: Server
Type: Start manual
Model: Fujitsu Primergy RX200 S4 , Fujitsu Primergy RX300 S4
Pages: 8 (1.87 Mb)
1
2
3
4
5
6
7
8
1
3
Installing internal options
If internal options have been purchased separately, install them before installing the operating system.
1
Checking the items
supplied
Check the contents in the package using
the "Contents List".
If any items are missing, contact an ofce listed
in the "Contact Information".
n
PRIMERGY RX300 S4 Manuals
Manuals for this server are stored in the PRIMERGY Startup Disc.
Insert the PRIMERGY Startup Disc and click [PRIMERGY Manuals] on the [PRIMERGY Startup Disc] screen to refer to the
manuals.
The manuals can be read using Acrobat
®
Reader
®
or Adobe
®
Reader
®.
When using Acrobat
®
Reader
®
, use version 5.0 or later.
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Make sure to check the following manuals before perform-
ing operations.
"Chapter 6 Installing Internal Options"
"PRIMERGY Server Books"/"Supplement"
n
Precautions before installing the OS
When using the following external optional devices, take
note of the following before installing the OS.
- USB optional devices other than FDD units
Install USB optional devices other than FDD unit after in-
stalling the OS.
- PRIMERGY SX35
When RAID is congured using the hard disk units in
the PRIMERGY SX35, delete the RAID conguration
rst. After installing the OS, create a RAID conguration
again.
- External storage system such as the ETERNUS disk
storage systems
Do not turn the storage system on until OS installation has
completed.
n
Available Internal options and
installation locations
After installing internal options, check that the installation
order and location are correct and cables are correctly
connected.
RX300 S4
B7FH-5831-01EN-00