• Home
• Brands
• Quantum Manuals
• Quantum SuperLoader 3A
• Quantum SuperLoader 3 Quick Start Manual

Quantum SuperLoader 3 Quick Start Manual

Download Quick start manual of Quantum SuperLoader 3A Battery Pack, Network Card for Free or View it Online on All-Guides.com.

1

2

3

4

This Quick Start Guide contains a

sequence of steps recommended for

unpacking and installing a bar code

reader in the Quantum SuperLoader.

Warning: The bar code

reader is a Class 1 laser

product, complying

with 21 CFR 1040.10

and 1040.11. The use of

controls or adjustments

or the performance of

procedures other than those

specified herein may result

in hazardous radiation

exposure.

It is recommended that

authorized service personnel

perform this upgrade.

For additional information, visit

www.quantum.com, refer to the

Quantum Superloader Automated

Tape Library User Manual

installed as

a PDF (portable document format) file

on the SuperLoader Documentation

CD, or contact Quantum Technical

Support and Customer Service by

calling 1-800-284-5101.

Note: Adobe

®

Acrobat

®

Reader

4.0 or later is required to view

and print PDF documents.

To download a free copy of

Adobe Acrobat Reader, go to

www.adobe.com.

Step 1: Unpack the Bar Code Reader

a. Place the carton on an electrostatic discharge (ESD) safe work surface. As you place

the carton on the work surface, look for markings on the shipping carton that

indicate the top of the carton so you can position the carton top-side up.

b. Using scissors, a utility knife, or other appropriate tool, carefully cut the packing

tape along the length and ends of the carton.

c. Fold open the box flaps.

d. Remove the plastic bag containing instructions and warranty information.

e. Remove the top piece of foam from the carton.

f. Reach into the carton and lift out the bar code reader. The bar code reader should

be enclosed in an antistatic package.

Caution: This device is static-sensitive. Proper grounding and electrostatic

discharge (ESD) handling precautions are required before removing the bar

code reader from its packaging.

g. Set the bar code reader down on the work surface.

Step 2: Unmount the SuperLoader

Warning: Two persons are required to lift the SuperLoader or unmount it

from a rack.

Before you can install the bar code reader, you must remove the right magazine or

magazine blank from the SuperLoader and then remove the SuperLoader from its

rack or cabinet. For instructions about removing magazines and unmounting the

SuperLoader from a rack, refer to the

Quantum SuperLoader User’s Guide

.

Note: Unmounting the SuperLoader requires a #1 PHILLIPS

®

screwdriver. This

screwdriver will also be required during the remainder of the bar code reader

upgrade procedure.

SuperLoader™ Bar Code Reader Upgrade

Quick Start Guide