Amx FG1052-13 Quick Start
Download Quick start manual of AMX FG1052-13 Computer Hardware for Free or View it Online on All-Guides.com. This version of AMX FG1052-13 Manual compatible with such list of devices, as: FG1052-13, FG1052-16, FG1052-19, FG1052-25, FG1052-28
Brand: AMX
Category: Computer Hardware
Type: Quick start manual
Model: AMX FG1052-13 , AMX FG1052-16 , AMX FG1052-19 , AMX FG1052-22 , AMX FG1052-25 , AMX FG1052-28
Pages: 2 (0.63 Mb)
1
2
Quick Start Guide
AutoPatch Component Video (BNC & RCA) DAD Modules
Overview
Component Video Distribution Amplifier Driver (DAD) Modules are available with
BNC or RCA connectors. The modules have either one input and two outputs for
1:2 distribution or one input and six outputs for 1:6 distribution of component video
signals. The single component video input is distributed to two or six outputs over
standard cable runs of up to 500 ft. (152.4 m) for YPbPr and up to 250 ft. (76.20 m) for
RGB with no additional equipment required. Each output can be independently
adjusted for gain and peaking to ensure the proper amount of compensation is
provided for each cable run. This guide contains complete information for this product.
Product Specifications
* The Component Video 1:2 DAD module uses a power supply that is provided with
the unit.
** Gain and Peaking are independent switches that allow the user to turn on or off the
gain and peaking.
Installation
Mounting Options
1:2 Models
Desktop – Attach the rubber feet (included) to the bottom of the module.
V Style Rack Mounting – Mounting brackets and rack trays are available for these
versatile modules (contact your AMX representative).
1:6 Models
Desktop
– Attach the rubber feet (included) to the bottom of the module.
Rack Mounting
To rack mount a 1:6 module:
1. Remove one screw from each side of DAD (FIG. 3) Do not reuse for rack ear.
2. Attach the rack ears as shown in FIG. 3 (screws provided).
3. Place the module in a standard EIA 19 in. (48.26 cm) rack and secure it to rack
with screws.
FIG. 1
Component Video DADs, 1:2 models
FIG. 2 Component Video DADs, 1:6 models
General Specifications
Approvals Pending
Power* 1:2 model
Consumption (max.)
Consumption (typical)
Connector
Power 1:6 model
Consumption (max.)
Consumption (typical)
+12 VDC to +24 VDC, 1A
+12 VDC, 400 mA
2.1 mm DC power jack
100 to 240 VAC single phase, 50 - 60 Hz
120 VAC, 650 mA
120 VAC, 100 mA
Operational Temperature
32° to 110° F (0° to 43° C)
Humidity 0 to 90% non-condensing
Dimensions 1:2 model 5.15 in. (13.08 cm) depth
4.35 in. (10.92 cm) width
1.66 in. (4.22 cm) height without feet, 1 RU on rack shelf
Approximately 1.3 lb. (0.6 kg) weight
Dimensions 1:6 model 5.15 in. (13.08 cm) depth
17.40 in. (44.20 cm) width without rack ears
19.00 in. (48.26 cm) with ears
1.72 in. (4.37 cm) 1 RU height without feet
Approximately 4.5 lb. (2 kg) weight
Connector Type BNC, RCA
RGB & YPbPr Signal Specifications
Frequency Response ±3 dB, 450 MHz or better
Signal to Noise Ratio Vin = 0.7 V, 100% IRE >65 dB
Level
Input (max.)
Output (max.)
±1.75 V
±1.75 V
Impedance
Input
Output
75 ohms
75 ohms
Return Loss -45 dB @ 5 MHz
Connector Type BNC, RCA
RGB (BNC) Model FG1052-25
YPbPr (RCA) Model FG1052-19
YPbPr (RCA) Model FG1052-22
RGB (BNC) Model FG1052-28
R
G
B
R
G
B
R
G
B
R
G
B
R
G
B
RGB Gain & Peaking** Specifications
Gain
OFF
ON
Unity
+0.85 dB
Peaking
OFF
ON
No peaking
8 dB @ 150 MHz
8 dB @ 300 MHz
Cable Length (max.) 250 ft. (76.20 m)
YPbPr Gain & Peaking** Specifications
Gain
OFF
ON
Unity
+0.85 dB
Peaking
OFF
ON
No peaking
9 dB @ 37.5 MHz
9 dB @ 80 MHz
Cable Length (max.) 500 ft. (152.4 m)
FIG. 3 Remove screw (do not re-use) & attach rack ears
Remove screw