• Home
• Brands
• FUTABA Manuals
• FUTABA ATTACK-4
• FUTABA ATTACK-4 Manual

FUTABA ATTACK-4 Manual

Download Instruction manual of FUTABA ATTACK-4 Radio for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

Futaba

DIGITAL PROPORTIONAL

RADIO CONTROL

AM

Thank you for purchasing a Futaba digital proportional radio control set.

Please read this manual carefully before using your set.

FEATURES OF FP-4NBL

The FP-4NBL is a 4 channel AM proportional radio control

set

with

an

ergonomic

case

created

as

a

result of the exhaustive

pursuit of easier operation, newly designed sticks for smooth

and positive operation, servo reversing switch for each chan-

nel, and other innovations based on the opinions and needs of

many RC modelers.

Please read this manual before using your new set.

TRANSMITTER FP-T4NBL______________

• Servo reversing switch for each channel. Servos are reversed

by using this switch.

• Newly designed sticks operate smoothly and positively.

Spring tension mechanism allows adjustment of the operat-

ing feel of the stick lever.

• Nonslip adjustable lever head allows adjustment of the stick

length as desired.

• Functional case, created as a result of the exhaustive pursuit

of easier operation, has evolved a thick case which fits into

the palm of the hand.

• Easy to read transmitter battery voltage/output level meter.

• Neck strap bracket provided as standard. Operation is easier

if the transmitter is hung from your neck by using the neck

strap.

• Nicad operation as standard.

RECEIVER FP-R114H

• High performance AM 4 channel receiver in which miniature

size and light weight have been achieved by using the PC

board space to the maximum.

• Narrow band ceramic filter improves rejection of adjacent

channel interference.

FEATURES OF MCR-4A RECEIVER

• Narrow band design using a narrow band ceramic filter.

FEATURES OF MCR-4A AMP

• Built-in heat protector prevents overheating of the amplifier

by a continuous overcurrent.

• Motor idle or maximum slow can be arbitrarily set at the

transmitter throttle stick maximum slow position by built-in

idle point trimmer.

SERVO FP-S148 RUGGED, LOW-PROFILE SERVO

• Vibration and shock resistance have been improved further

by using a direct wiring system which directly connects the

servo amp, motor and potentiometer.

•

The height of the

servo

has

been

reduced and

high

torque,

high speed, and smooth movement equal to that of the core-

less servo have been realized by using a new small, high-

performance motor. (Output torque 3kg.cm, operating

speed 0.22 sec/60°).

SERVO FP-S133 HIGH-QUALITY MICROSERVO_

• Futaba hybrid custom 1C provides high starting output

torque, narrow dead-band, and excellent trackability.

• Thick film gold plated connector pins insure positive contact

connector shape increase reliability against shock and vibra-

tion. The connector housing has a reverse insertion preven-

tion mechanism.

• Adjustable (splined) horn permits arbitrary setting of the

neutral position.

• Despite being a microservo, operating speed is a fast 0.21

sec/ 60° and output torque is a high 2.2 kg/cm.

SET CONTENTS AND RATINGS

(Specifications are subject to change without prior notice.)

RECEIVER WITH LINEAR CONTROLLER MCR-4A

• FET amplifier with miniature lightweight AM 4-channel re-

ceiver and motor controller in one pack.

• Since the drive motor power supply (7.2 V NiCd battery

pack, etc.) can also be used to power the receiver and servos,

troublesome wiring is unnecessary and the model can be

made lighter.

• Built-in high performance low voltage "autocut" circuit pre-

vents loss of control due to power supply voltage drop

during flight.

• Since the motor speed can be controlled steplessly from

maximum alow to high, acrobatics equal to those of engine

aircraft can be reproduced even with a motor aircraft.

Transmitter

Receiver

Servo

Charger

Nicad Battery

Switch

Accessories

FP-4NBL

For engine

powered plane

FP-T4NBL x 1

FP-R114H x 1

FP-S148 x 3

FBC-8B(4) x 1

NR-4QBx1 | NR-4Kx1

SSW-J x 1

Servo tray ——

Extension cord. Neck strap. Frequency flag,

Spare horn. Screws

For glider

FP-S133x2

For electric

powered plane

MCR-4A x 1

—