Radio Shack Accurian 42-6052 Quick Manual
Download Manual of Radio Shack Accurian 42-6052 CD Player for Free or View it Online on All-Guides.com.
Brand: Radio Shack
Category: CD Player
Type: Manual for Radio Shack Accurian 42-6052
Pages: 2 (2.31 Mb)
1
2
use any of the following to power your CD player:
• Two AA alkaline batteries (not supplied).
• Two rechargeable batteries (not supplied).
• Standard AC power using a regulated AC adapter (not supplied).
• Vehicle battery power using the
supplied DC adapter.
alkaline/rechargeable
batteries
1. Open the hinged battery cover.
Close when finished.
2 Insert two AA alkaline or
rechargeable Ni-Cd batteries on
top of the ribbon.
charge batteries
You can charge rechargeable
Ni-Cd batteries in this CD player.
If the label of a rechargeable battery extends over the negative
side of the battery, you will not be able to charge it in the CD
player.( You can contact local RadioShack store for the special
rechargeable Ni-Cd battery)
1. Insert two rechargeable NiCd batteries.
2. Plug in the AC/DC adapter. Charge for 12—15 hours.
3. Unplug the AC/DC adapter. Your CD player is ready to play.
AC adapter
You can power your CD player using a 4.5V, 600 mA AC adapter (not
supplied). Follow these steps to connect the CD player to
AC power.
1. Insert one end of the AC adapter into the DC IN jack.
2. Plug the other end into an AC wall outlet.
Do not touch the AC adapter with wet hands. This can
result in electrical shock.
If the AC adapter is connected when the batteries are
installed, the power supply automatically switches to the
AC power source and the batteries are disconnected.
DC adapter
1 Insert one end of the DC adapter into the DC IN
jack.
2. Plug the other end into the cigarette lighter in
your vehicle.
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for purchasing your CD/MP3/FM
Stereo Player from RadioShack.
using your MP3/CD(CD/CDR/CDRW) player
CD player Users Guide
Headphones DC Adapter
Car Kit (CD to Cassette Adapter)
Note: Actual product may vary from the images found in this
document.
what’s included
Press EQ repeatedly to select different types of music effects (Normal, Classic,
Rock, Jazz, Pop).
NORMAL will automatically be activated when playing CDs or MP3s.
EQ function cannot be activated in RADIO mode.
Press Stop to stop play in all modes.
The power turns off automatically
after about 30 seconds when you
press STOP, or all the tracks on a
disc have been played. Power turns
off immediately when you press
STOP twice.
Press Skip+ to skip forward to the
next track in CD and MP3 mode.
Press and hold the SKIP+ or SKIP-
during play to scan the disc at high
speed. When you find the desired
section of the disc, release the button.
Normal play will resume.
Press PLAY/PAUSE to activate CD/MP3 mode. Press and hold
PLAY/PAUSE. As the disc begins to spin, READING appears on the
display. When the music begins, adjust the volume as desired.
Press PLAY/PAUSE again to pause. The elapsed time will flash on
the display. Resume normal play by pressing PLAY/PAUSE.
Press Preset - to preset radio
station down in Tuner mode.
Press SKIP - once to skip to
the beginning of the current
track, or repeatedly to skip to
previous tracks.
Press Mode/FM ST./Mono to select
play modes Repeat 1, Repeat All,
Repeat Directory, Random or Intro, in
CD and MP3 mode.
Intro scan play - For CDs and MP3s,
repeatedly press MODE until INT
appears. Press PLAY/PAUSE to
activate. The first 10 seconds of each
track will play in order.
Random play - Press Mode until RND
appears to play CD or MP3 tracks in
random order. Press PLAY/PAUSE
to activate.
powering your CD Player
Use PROG./MEM. to program your
favorite tracks in CD mode, or your
favorite radio stations in Tuner mode.
Press ESP activates the antishock
protection system for 45 seconds in CD
mode, and 120 seconds in MP3 mode.
NOTE
programmed play
CD and MP3 tracks on a disc can be programmed to
play in any order. Up to 60 tracks can be programmed.
1. In stopped mode press PROG./MEM. The track
number 00 flashes, PGM and program number
P01 are shown or 00 000 flashes in MP3 mode
PGM and program number P01 are shown. Press
SKIP+ or SKIP- to select the first track to be
programmed.
When programing in MP3 mode, press the
DIR/PRESET + or DIR/PRESET- to select
directory.
2 Press PROG./MEM. again to store the track you selected. The display
P01 changes to
P02.
3. Repeat steps 1
and 2 to program
additional tracks.
4. After you finish
programming,
press PLAY/PAUSE.
Programmed play begins from the first programmed track.
The player stops automatically after all programmed tracks
have been played. The programmed tracks are stored in
memory until the disc compartment is opened or power is
turned off.
hold switch–hold all buttons
Once you have made all adjustments and selections, slide
HOLD to ON. HOLD appears on the display. This locks
all buttons. Slide the HOLD SWITCH to OFF to unlock all
controls.
NOTE
If you press PLAY/PAUSE at power off mode during the
HOLD function is activated, the display will show HOLD, then OFF appears
the unit will power off automatically.
repeat play
For CDs and MP3s to repeat a single track, press MODE repeatedly until
REPT1 appears in the display. Press SKIP+ or SKIP - to select your
favorite song. The track will repeat until you press STOP.
To repeat all tracks on a CD/MP3 press MODE repeatedly until REPT ALL
appears in the display. All tracks will be repeated.
To repeat a single directory in MP3 mode, press MODE repeatedly until
REPT DIR appears in the display, the whole directory will be repeated.
more CD player functions
For MP3 discs, ESP
cannot be cancelled
after you activate it.
Because your MP3
disc has a large
capacity, the disc-
reading time will
increase.
file-selection
playback
Press DIR/PRESET, SKIP+ or SKIP- to select the files
you want to include in the same playlist, just as you would
with a CD.
To select different files from different directories, in play
mode, select the directory first, then choose the file you need
in the directory.
1. Connect the supplied
headphones into the PHONES
jack.
2. Slide OPEN switch to open the
CD door. Insert a disc label side
up. Close the CD door.
special MP3 functions
headphones
volumehold
line out
DC in
place disc here
NOTE
NOTE
The power turns on automatically when
you press PLAY/PAUSE or RADIO.
UBS - enhances
bass effect
hold
open