Garmin AIS 300 Reference

Download Technical reference of Garmin GPS 17x NMEA 2000 Antenna, Autopilot System for Free or View it Online on All-Guides.com. This version of Garmin GPS 17x NMEA 2000 Manual compatible with such list of devices, as: GHP 10 Marine Autopilot System, GPSMAP 421, GPSMAP 521/521s, GPSMAP 720/720s, AIS 600

Garmin GPS 17x NMEA 2000 Technical reference - Page 1
1
Garmin GPS 17x NMEA 2000 Technical reference - Page 2
2
Garmin GPS 17x NMEA 2000 Technical reference - Page 3
3
Garmin GPS 17x NMEA 2000 Technical reference - Page 4
4
Garmin GPS 17x NMEA 2000 Technical reference - Page 5
5
Garmin GPS 17x NMEA 2000 Technical reference - Page 6
6
Garmin GPS 17x NMEA 2000 Technical reference - Page 7
7
Garmin GPS 17x NMEA 2000 Technical reference - Page 8
8
Garmin GPS 17x NMEA 2000 Technical reference - Page 9
9
Garmin GPS 17x NMEA 2000 Technical reference - Page 10
10
Garmin GPS 17x NMEA 2000 Technical reference - Page 11
11
Garmin GPS 17x NMEA 2000 Technical reference - Page 12
12
Garmin GPS 17x NMEA 2000 Technical reference - Page 13
13
Garmin GPS 17x NMEA 2000 Technical reference - Page 14
14
Garmin GPS 17x NMEA 2000 Technical reference - Page 15
15
Garmin GPS 17x NMEA 2000 Technical reference - Page 16
16
Garmin GPS 17x NMEA 2000 Technical reference - Page 17
17
Garmin GPS 17x NMEA 2000 Technical reference - Page 18
18
Garmin GPS 17x NMEA 2000 Technical reference - Page 19
19
Garmin GPS 17x NMEA 2000 Technical reference - Page 20
20
Garmin GPS 17x NMEA 2000 Technical reference - Page 21
21
Garmin GPS 17x NMEA 2000 Technical reference - Page 22
22
Garmin GPS 17x NMEA 2000 Technical reference - Page 23
23
Garmin GPS 17x NMEA 2000 Technical reference - Page 24
24
Garmin GPS 17x NMEA 2000 Technical reference - Page 25
25
Garmin GPS 17x NMEA 2000 Technical reference - Page 26
26
Garmin GPS 17x NMEA 2000 Technical reference - Page 27
27
Garmin GPS 17x NMEA 2000 Technical reference - Page 28
28
Garmin GPS 17x NMEA 2000 Technical reference - Page 29
29
Garmin GPS 17x NMEA 2000 Technical reference - Page 30
30
Garmin GPS 17x NMEA 2000 Technical reference - Page 31
31
Garmin GPS 17x NMEA 2000 Technical reference - Page 32
32
Garmin GPS 17x NMEA 2000 Technical reference - Page 33
33
Garmin GPS 17x NMEA 2000 Technical reference - Page 34
34
Garmin GPS 17x NMEA 2000 Technical reference - Page 35
35
Garmin GPS 17x NMEA 2000 Technical reference - Page 36
36
Garmin GPS 17x NMEA 2000 Technical reference - Page 37
37
Garmin GPS 17x NMEA 2000 Technical reference - Page 38
38
Garmin GPS 17x NMEA 2000 Technical reference - Page 39
39
Garmin GPS 17x NMEA 2000 Technical reference - Page 40
40
Garmin GPS 17x NMEA 2000 Technical reference - Page 41
41
Garmin GPS 17x NMEA 2000 Technical reference - Page 42
42
28 Technical Reference for Garmin NMEA 2000 Products
NMEA 2000-Certied Sensor Conguration Information
1. From the NMEA 2000 Devices list, select the GET 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Engine Number.
For other Garmin marine devices, select Cong > Engine Number.
3. Select the number of the engine that the adapter is associated with.
4. Select Done.
Troubleshooting the Gauge Type
When connected to a gauge, the GET 10 adapter gauge type is set to Auto Detect by default, and the adapter automatically detects the type of
gauge it is connected to. If the engine-tilt reading on a connected Garmin chartplotter or marine instrument changes with the engine RPM, the
adapter may be detecting the wrong type of gauge.
To test the gauge-type setting:
1. When the boat is not moving, put the engine in neutral.
2. Use the throttle to increase the engine RPM. If the engine-tilt reading changes with the engine RPM, change the gauge type.
To change the gauge type:
1. From the NMEA 2000 Devices list, select the GET 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Gauge Type.
For other Garmin marine devices, select Cong > Gauge Type.
3. Select an option:
To automatically detect the gauge type, select Auto Detect.
To indicate a one-coil gauge, select 1 Coil.
To indicate a two-coil gauge, select 2 Coil.
4. Perform the gauge-type setting test.
Conguring the GET 10 Adapter if the Engine Tilt Calibration, Engine Number, and Gauge Type
Selections Are Not Displayed
Depending on the version of software loaded on your Garmin marine instrument, the specic conguration options may not be displayed on the
conguration screens.
To calibrate the engine tilt if the menu option is not displayed:
To use the GET 10 adapter, you must calibrate the tilt of the engine that the adapter is associated with.
1. Turn the boat ignition key to the On position (not Start).
2. From the NMEA 2000 Devices list, select the GET 10 device.
3. Select an option:
For most Garmin chartplotters, select Review > Generic Cong.
For other Garmin marine devices, select Cong >Generic Conguration.
4. Set the engine tilt to the full-up position. The engine tilt is at 100%.
5. Enter the following command: “ENGINETILT=100Done”
6. Set the engine tilt to the full-down position. The engine tilt is at 0%.
7. Enter the following command: “ENGINETILT=0Done”
To congure the engine number if the menu option is not displayed:
If your boat has multiple engines, you can indicate which engine each GET 10 adapter is associated with.
1. From the NMEA 2000 Devices list, select the GET 10 device.
2. Select an option: