Garmin AIS 300 Reference

Download Technical reference of Garmin GPS 17x NMEA 2000 Antenna, Autopilot System for Free or View it Online on All-Guides.com. This version of Garmin GPS 17x NMEA 2000 Manual compatible with such list of devices, as: 4010, GPSMAP 441, GPSMAP 441s, GPSMAP 541/541s, GPSMAP 6208

Brand: Garmin

Category: Antenna , Autopilot System , Fish Finder , GPS , Kitchen Appliances , Marine Equipment , Marine GPS System , Marine Radar , Mouse , Radio , Transceiver

Type: Technical reference

Model: Garmin GPS 17x NMEA 2000 , Garmin GHP 10 Marine Autopilot System , Garmin VHF 300 series , Garmin 4010 , Garmin 720 , Garmin GPSMAP 421 , Garmin GPSMAP 421/421s , Garmin GPSMAP 421s , Garmin GPSMAP 441 , Garmin GPSMAP 441/441s , Garmin GPSMAP 441s , Garmin GPSMAP 521 , Garmin GPSMAP 521/521s , Garmin GPSMAP 521s , Garmin GPSMAP 526 , Garmin GPSMAP 526/526s , Garmin GPSMAP 526s , Garmin GPSMAP 6008 , Garmin GPSMAP 6012 , Garmin GPSMAP 7012 , Garmin GPSMAP 7015 , Garmin GPSMAP 720/720s , Garmin GPSMAP 740 , Garmin GWS 10 Marine Wind Sensor , Garmin 5215 , Garmin GPSMAP 4210 , Garmin GPSMAP 5015 , Garmin GPSMAP 541/541s , Garmin GPSMAP 541s - Marine GPS Receiver , Garmin GPSMAP 6208 , Garmin GPSMAP 6212 , Garmin GPSMAP 7212 , Garmin GPSMAP 7215 , Garmin GPSMAP 740/740s , Garmin AIS 600

Pages: 42 (5.81 Mb)

Download Garmin GPS 17x NMEA 2000 Technical reference

Garmin GPS 17x NMEA 2000 Technical reference - Page 1
1
Garmin GPS 17x NMEA 2000 Technical reference - Page 2
2
Garmin GPS 17x NMEA 2000 Technical reference - Page 3
3
Garmin GPS 17x NMEA 2000 Technical reference - Page 4
4
Garmin GPS 17x NMEA 2000 Technical reference - Page 5
5
Garmin GPS 17x NMEA 2000 Technical reference - Page 6
6
Garmin GPS 17x NMEA 2000 Technical reference - Page 7
7
Garmin GPS 17x NMEA 2000 Technical reference - Page 8
8
Garmin GPS 17x NMEA 2000 Technical reference - Page 9
9
Garmin GPS 17x NMEA 2000 Technical reference - Page 10
10
Garmin GPS 17x NMEA 2000 Technical reference - Page 11
11
Garmin GPS 17x NMEA 2000 Technical reference - Page 12
12
Garmin GPS 17x NMEA 2000 Technical reference - Page 13
13
Garmin GPS 17x NMEA 2000 Technical reference - Page 14
14
Garmin GPS 17x NMEA 2000 Technical reference - Page 15
15
Garmin GPS 17x NMEA 2000 Technical reference - Page 16
16
Garmin GPS 17x NMEA 2000 Technical reference - Page 17
17
Garmin GPS 17x NMEA 2000 Technical reference - Page 18
18
Garmin GPS 17x NMEA 2000 Technical reference - Page 19
19
Garmin GPS 17x NMEA 2000 Technical reference - Page 20
20
Garmin GPS 17x NMEA 2000 Technical reference - Page 21
21
Garmin GPS 17x NMEA 2000 Technical reference - Page 22
22
Garmin GPS 17x NMEA 2000 Technical reference - Page 23
23
Garmin GPS 17x NMEA 2000 Technical reference - Page 24
24
Garmin GPS 17x NMEA 2000 Technical reference - Page 25
25
Garmin GPS 17x NMEA 2000 Technical reference - Page 26
26
Garmin GPS 17x NMEA 2000 Technical reference - Page 27
27
Garmin GPS 17x NMEA 2000 Technical reference - Page 28
28
Garmin GPS 17x NMEA 2000 Technical reference - Page 29
29
Garmin GPS 17x NMEA 2000 Technical reference - Page 30
30
Garmin GPS 17x NMEA 2000 Technical reference - Page 31
31
Garmin GPS 17x NMEA 2000 Technical reference - Page 32
32
Garmin GPS 17x NMEA 2000 Technical reference - Page 33
33
Garmin GPS 17x NMEA 2000 Technical reference - Page 34
34
Garmin GPS 17x NMEA 2000 Technical reference - Page 35
35
Garmin GPS 17x NMEA 2000 Technical reference - Page 36
36
Garmin GPS 17x NMEA 2000 Technical reference - Page 37
37
Garmin GPS 17x NMEA 2000 Technical reference - Page 38
38
Garmin GPS 17x NMEA 2000 Technical reference - Page 39
39
Garmin GPS 17x NMEA 2000 Technical reference - Page 40
40
Garmin GPS 17x NMEA 2000 Technical reference - Page 41
41
Garmin GPS 17x NMEA 2000 Technical reference - Page 42
42
Technical Reference for Garmin NMEA 2000 Products 31
NMEA 2000 Checklist
To test the gauge-type setting:
1. When the boat is not moving, put the engine in neutral.
2. Use the throttle to increase the engine RPM. If the uid-level reading changes with the engine RPM, change the gauge type.
To change the gauge type:
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Gauge Type.
For other Garmin marine devices, select Cong > Gauge Type.
3. Select an option:
To automatically detect the gauge type, select Auto Detect.
To indicate a one-coil gauge, select 1 Coil.
To indicate a two-coil gauge, select 2 Coil.
4. Perform the gauge-type setting test.
Resetting the Fluid Level Calibration
You can reset the uid-level calibration of the tank that the GFL 10 adapter is associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Level Calibration.
For other Garmin marine devices, select Cong > Level Calibration.
3. Select Reset Calibration.
4. Select Yes.
5. Calibrate the uid level.
Conguring the GFL 10 Adapter if the Tank Number and Fluid Type Selections Are Not Displayed
Depending on the version of software loaded on your Garmin marine instrument, the specic conguration options may not be displayed on the
conguration screens.
To congure the tank number if the menu option is not displayed:
If your boat has multiple uid tanks, you can indicate which tank each GFL 10 adapter is associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Generic Cong.
For other Garmin marine devices, select Cong >Generic Conguration.
3. Enter the following command: “INSTANCE=”
4. After the command, enter a whole number between 1 and 16, which indicates the tank number, followed by Done.
For example, INSTANCE=2Done indicates that the adapter is associated with tank number 2.
To congure the uid type if the menu option is not displayed:
You can indicate the type of uid that is in the tank that each GFL 10 adapter is associated with.
1. From the NMEA 2000 Devices list, select the GFL 10 device.
2. Select an option:
For most Garmin chartplotters, select Review > Generic Cong.
For other Garmin marine devices, select Cong >Generic Conguration.
3. Enter the following command: “FLUIDTYPE=”
4. After the command, enter a number between 0 and 5 to indicate the uid type as dened in the following table, followed by Done.
•
•
•
•
•
•
•
•
•
•
•

Related Products for Garmin AIS 300

Related Manuals for Garmin AIS 300

Garmin AIS 300: Frequently viewed Manuals