Radio Shack 2.4GHz Cordless Phone Quick Start
Download Quick start of Radio Shack 2.4GHz Cordless Phone Telephone for Free or View it Online on All-Guides.com.
Brand: Radio Shack
Category: Telephone
Type: Quick start for Radio Shack 2.4GHz Cordless Phone
Pages: 2 (0.72 Mb)
1
2
ENGLISH
ENGLISH
QUICK START
QUICK START
QUICK START
QUICK START
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
UPZZ69010ZZ
RadioShack Corporation
Fort Worth, Texas 76102
02A03
PrintedinChina
43-3546
2.4GHz Cordless Phone
Refer to your Owner’s Manual for complete instructions.
www.radioshack.com
SM
OPTIONAL ACCESSORIES
Choose a location that is near a phone
wall jack and power outlet. The base
can be placed on a desk, tabletop, or
mounted on a standard wall plate.
Refer to your Owner’s Manual for wall
mounting instructions.
Remove the handset’s battery
compartment cover. Insert the battery
pack connector (red and black wires)
into the small black jack inside the
compartment. Replace the battery
compartment cover and place the
handset in the base facing forward.
Connect the supplied AC adapter to
the DC IN 9V jack and a standard AC
wall outlet.
Charge the handset at least 15-20
hours before connecting the base to
the phone jack.
After battery charging is complete,
connect the telephone line cord to the
base and the phone wall jack.
Setting Up Your Phone
Using Your Phone
Accessories are available at
your local RadioShack store
or online at
www.radioshack.com. The
following are some of the
available accessories. Visit
your local RadioShack store
or www.radioshack.com for
a more complete listing of
available accessories.
Action Handset On Base Handset Off Base
Answer a
call
When the phone rings, remove
the handset from the base
(Auto Talk).
Press talk, any number key,
*/tone,or# (Auto Talk).
Make a
call
1. Remove the handset from
the base and press
talk.
2. The TALK/BATT LOW
LED flashes and turns on.
3. Listen for the dial tone.
4. Dial the number.
1. Press talk.
2. The TALK/BATT LOW
LED flashes and turns on.
3. Listen for the dial tone.
4. Dial the number.
Hang up Press
end or return the handset to the base.
Redial
1. Remove the handset from
the base and press
talk.
2. Listen for the dial tone.
3. Press
REDIAL/
PAUSE to dial the last
dialed number.
1. Press talk.
2. Listen for the dial tone.
3. Press
REDIAL/
PAUSE to dial the last
dialed number.
Ringer
Mute
N/A
Press
end while the phone is
ringing.
Caller ID
Headset
Digital Answering System