Radio Shack Big Digit Sport Watch Owner's Manual
Download Owner's manual of Radio Shack Big Digit Sport Watch Watch for Free or View it Online on All-Guides.com.
Brand: Radio Shack
Category: Watch
Type: Owner's manual for Radio Shack Big Digit Sport Watch
Pages: 2 (0.05 Mb)
1
2
©
2001 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
OWNER’S MANUAL — Please read before using this equipment.
Big Digit Sport Watch
A QUICK LOOK AT YOUR WATCH
Caution:
The watch is water resistant to a depth of about 100 feet
(30 meters), but it is not water proof.
SETTING THE TIME/DATE
Note:
If you do not press a button for about 30 seconds, the watch
exits its setup mode and stores the new settings.
1. Repeatedly press
MODE
until
J?C;
J?C;J?C;
J?C;
then the current time
appears.
2. Hold down
SPLIT/RESET
until
I;Jý
I;JýI;Jý
I;Jý
appears. The second digit
flashes.
3. Press
START/STOP
to reset the second digits to 00.
4. Press
MODE
. The minute digits flash.
5. Repeatedly press or hold down
START/STOP
to select the
desired minutes.
6. Press
MODE
. The hour digits flash.
7. Repeatedly press or hold down
START/STOP
to select the
desired hour.
Note:
If the watch is set to the 12-hour time display format,
select an AM or PM hour. appears at the top left of the dis-
play when a PM hour is selected.
8. Repeat Steps 6–7 to set the desired date, month, day of the
week, 12- or 24-hour format, and date display format.
Notes:
• When setting the date, you can select the date to appear in
either the M-D (month-date) or D-M (date-month) format.
• There are always 29 days displayed for the month of Febru-
ary. If there are only 28 days in February for the current year,
you must manually change the date from
(ý (/ý
(ý (/ý(ý (/ý
(ý (/ý
(February 29)
to
)ý'
)ý')ý'
)ý'
(March 1).
• If you need to set a date later than the last day of the dis-
played month (for example, if you want to set the date to
August 31 and the month is set to
,
,,
,
for June), you must set
the current month first, then the day.
9. Press
SPLIT/RESET
at any time to confirm the settings and
return to the time display.
The watch automatically displays the time. When you are using the
daily alarm, the time reappears if you do not press any button for
about 2 minutes.
To view the calendar, with the time displayed, press
START/STOP
.
:7J;
:7J;:7J;
:7J;
then the month and date appear for about 5 seconds. Then the
time reappears.
SETTING THE DAILY ALARM TIME
1. Repeatedly press
MODE
until
7BC
7BC7BC
7BC
then the last set alarm time
appears.
2. Hold down
SPLIT/RESET
until
I;J
I;JI;J
I;J
appears. The minute digits
flash.
3. Repeatedly press or hold down
START/STOP
to set the desired
minute, then press
MODE
. The hour digits flash.
4. Repeatedly press or hold down
START/STOP
to set the desired
hour.
Note:
Be sure to select an AM or PM hour in the display format.
appears at the top left of the display when PM is selected.
5. Press
SPLIT/RESET
to store the setting.
6. To return to the time display, repeatedly press
MODE
or wait
about 2 minutes.
To check the set alarm time, repeatedly press
MODE
until
7BC
7BC7BC
7BC
then
the set alarm time appears.
TURNING THE DAILY ALARM/HOURLY
CHIME ON AND OFF
1. Repeatedly press
MODE
until
7BCý
7BCý7BCý
7BCý
then the set alarm time
appears.
2. Repeatedly press
START/STOP
to turn the alarms on or off.
• appears when the alarm is turned on.
• appears when the hourly chime is turned on.
At the set alarm time, the stopwatch beeps for about 20 seconds.
Press any button except
LIGHT
to silence the alarm sooner.
When the hourly chime is turned on, the watch beeps twice at the
beginning of each hour.
USING THE STOPWATCH
1. From the time display, press
MODE
twice to view the stopwatch.
IJM
IJMIJM
IJM
then the last reading of the stopwatch appears.
2. Press
SPLIT/RESET
to reset the counter to 00:00, The watch
beeps.
If you do not reset the counter, the stopwatch will start timing
from the last reading.
MODE – press to
view the time, set
an alarm, or run
the watch.
LIGHT – press to
turn on the back-
light for about 3
seconds.
START/STOP
– press to run
the timer.
SPLIT/RESET –
press to confirm a
selection, reset the
timer, or split the
timer.