Garmin GPSMAP 400 Reference Manual

Download Quick reference manual of Garmin GPSMAP 500 Avionics Display, Fitness Electronics for Free or View it Online on All-Guides.com. This version of Garmin GPSMAP 500 Manual compatible with such list of devices, as: GPSMAP 400, GPSMAP 420s - Marine GPS Receiver, GPSMAP 430sx, GPSMAP 520, GPSMAP 555s

Garmin GPSMAP 500 Quick reference manual - Page 1
1
Garmin GPSMAP 500 Quick reference manual - Page 2
2
To nd a marine service from your current location:
1. From the Home screen, select Where To.
2. Select the marine service category to which you want to navigate. The unit shows the list of
the 50 nearest locations and the distance to each.
3. Select the marine service item to which you want to navigate. A screen containing
information about the selected marine service appears.
4. Select Navigate To.
5. Select Go To or Route To.
OR
Select Guide To when using a preprogrammed BlueChart g2 Vision
card to use Auto Guidance.
6. Follow the colored line on the screen to the destination.
To stop navigating:
Press MENU, and then select Stop Navigating.
To search for a destination by name:
1. From the Home screen, select Where To > Search by Name.
2. Press up or down on the ROCKER to select a number or character; press left or right to
move elds.
3. Press SELECT to view the 50 nearest destinations that contain your search criteria.
When you create a waypoint, you can designate it as an MOB (Man OverBoard). This marks
the point and sets a course back to the marked location. When an MOB is active, an MOB
waypoint with an international MOB symbol is created and the unit is on an active navigation
to that point.
To mark your location:
1. From any screen, press MARK.
2. Select Back to return to the chart, or select MOB (Man OverBoard) to designate the
waypoint as an MOB point.
To create a new waypoint:
1. Move the map pointer to the location you want and press
SELECT.
2. Select Create Waypoint.
3. Select one of the following:
Edit Waypoint—customize the waypoint attributes.
Delete—delete the waypoint.
Navigate To—go to the waypoint.
Back—return to the navigation chart.
To edit a waypoint:
1. Create a new waypoint or select a waypoint on the navigation
chart.
2. Select Edit Waypoint.
3. Select the waypoint attribute you want to change (Name, Symbol,
Depth, Water Temp, or Position).
To move the waypoint on the navigation chart:
Select Edit Waypoint > Position > Use Chart.
To view a list of all waypoints:
From the Home screen, select Information > User Data > Waypoints.
Please visit www.garmin.com for additional documentation and information.
GPSMAP
®
400/500 Series
quick reference guide
Where To
Creating and Using Waypoints