Randell 3412 Specifications
Download Specifications of Randell 3412 Kitchen Appliance for Free or View it Online on All-Guides.com. This version of Randell 3412 Manual compatible with such list of devices, as: 3412, 3413, 3414, 3415
Brand: Randell
Category: Kitchen Appliance
Type: Specifications
Model: Randell 3412 , Randell 3413 , Randell 3414 , Randell 3415
Pages: 2 (0.1 Mb)
1
2
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Hot Food Table Gas Common Waterbath models 3400
model 3413 shown with
optional casters
Specifications:
UNIT TOP: Top to be one piece of die formed 20 gauge stainless
steel with 1 5/8" square nosing. Top stamped with individual
12"x 20" die formed raised perimeter openings with common
water bath tank below. Provided with 7" deep, removable 20
gauge stainless steel plate shelf, and 8" wide x 1/2" thick, full
length NSF composition workboard.
FOOD WELLS: 12"x 20" die formed raised perimeter openings
in stainless steel unit top. 12,000 B.T.U. gas burner(s) assembly
with safety shut-off and pilot light system mounted below one
piece stainless steel water tank to heat food wells. Supplied with
1" drain and gate valve.
CONTROLS: Controls for burner(s) mounted on front of 7" deep,
removable, stainless steel plate shelf.
UNIT BASE: Bottom shelf to be stainless steel with channel
bracing. Body ends to be stainless steel. Legs to be 6" high with
adjustable bullet foot. Legs mounted to full length channel frame
assembly on bottom of body assembly.
Standard Features:
• Die stamped raised sanitary rim pan openings in
stainless steel top with water bath tank below
• Stainless steel body construction - no assembly required
• 12000 BTU gas burner(s) with safety shut off and pilot
light system
• Stainless steel ends
• Stainless steel, full length plate shelf - 7" deep
• Full length, 8" wide NSF workboard
• 1" drain & gate valve
• 6" high adjustable legs
Description:
Gas operated, stainless steel open shelving base hot food table
with 20 gauge stainless steel top, and individual die-stamped
12" x 20" top openings. One piece, stainless steel common
water bath tank with drain and gate valve below. Gas burner,
pilot light and safety shut off system. 7" wide plate shelf with
burner control, & 8" wide NSF workboard. Unit on 6" high
adjustable legs.
model 3412 3413 3414 3415
Options & Accessories:
Counter Protectors
Serving Shelves/Plexi Shields
Overshelves
Casters
Roll Covers
Adaptor Plates
Manual Fill Faucet
Stainless Steel Back
Randell Hot Food Table, Page 2
Revised 02/05