Randell 533105PR Specifications
Download Specifications of Randell 533105PR Refrigerator for Free or View it Online on All-Guides.com. This version of Randell 533105PR Manual compatible with such list of devices, as: 53339PR, 53363PR, 53372PR, 53384PR, 53390PR
Brand: Randell
Category: Refrigerator
Type: Specifications
Model: Randell 533105PR , Randell 533117PR , Randell 53333PR , Randell 53336PR , Randell 53339PR , Randell 53342PR , Randell 53351PR , Randell 53354PR , Randell 53357PR , Randell 53360PR , Randell 53363PR , Randell 53372PR , Randell 53375PR , Randell 53378PR , Randell 53381PR , Randell 53384PR , Randell 53390PR
Pages: 4 (0.21 Mb)
1
2
3
4
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Custom Remote Raised Coldwall Refrigerator models 53000PR
Description:
Remote refrigerator storage units with mechanically cooled
raised rail. These units are offered in variety of lengths to meet
your specific base storage or pan storage requirements. The
mechanically cooled pan opening uses Randell’s exclusive
design technologies, such as our Exclusive Refrigerated Raised
Rail Thermostat allowing customers to make adjustments to the
rail temperatures (independent of the base). The rail is designed
to be a manual defrost system and allows the operator to shut
the rail off while leaving the base operational.
model 53354PR shown with
optional finished end
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2” nosing. Ends at top fitted with recessed
heavy duty steel bars for field bolting units together, producing a
hairline seam. Hinged louver panel to be stainless steel. Exterior body to
be corrosion resistant steel. Door opening frames are ABS and contain
magnetic strip for positive seal of door gaskets. Work surface to be at
36” work height. Legs to be 6” high stainless steel with adjustable
bullet foot. Legs mounted to full length channel frame assembly which
is integrally welded to bottom of body assembly. Legs can be moved left
to right to avoid floor obstacles during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
DOORS: Door fronts to be 22-gauge stainless steel exterior front with 16
gauge stainless steel door pulls/handles. The interior liner is vacuumed
formed ABS with integral gasket retainer for easy cleaning and accepts
Randell’s Exclusive Press Fit Gasket system. Doors are mounted on
concealed hinges. One removable wire shelf is supplied behind each
door.
REFRIGERATION: Refrigerant to be specified by customer (Specification
based on R-404a refrigerant). System is a balanced heavy duty system
set-up to accept hook-up to a single compressor system. The base is
cooled by an independent blower coil operating on its own expansion
valve and thermostat and operates through a dedicated solenoid
valve. The rail is provided with its own rail thermostat (located in the
mechanical housing) making it easily adjustable for specific ambient
conditions without effecting the balance of the system. An on/off switch
for the rail is provided. Optional electric condensate evaporator.
Standard Features:
• Low profile rail design with 2” recess pans provides easy
reach and optimal pan temperatures & reliability
• Front breathing mechanical housing with directed air flow-
Randell Exclusive
• Easy maintenance Press-Fit gaskets- A Randell Exclusive
• Raised rail thermostat- A Randell Exclusive
• Drain in rail for easy cleaning
• Hinged Removable stainless steel covers
• Foamed in place urethane insulation providing superior
insulation and durability
• 6” high adjustable legs, moveable left to right if needed
• Available up to 16’ under one common assembly
• Adapter bars are standard to accommodate a compliment of
1/6 size pans
Specifications:
Options & Accessories:
Patented Drawer Cartridge Systems - Exclusive
Randell Feature + 3 years parts & labor warranty!
Partial Length Rails
Tray racks for sheet pans (33" dp., 24" doors only)
Cutting boards
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Over-shelving storage options
Lift-off (removable) night covers
Hinged slide-back removable covers
Flat top rails for use in display type kitchens
Ambient fighting hood design with slide-back covers
Wide pan rail
Randell Custom, Page 21a
Revised 09/04
model 53333PR 53336PR 53339PR 53342PR 53351PR 53354PR 53357PR
53360PR 53363PR 53372PR 53375PR 53378PR 53381PR 53384PR
53390PR 533105PR 533117PR