Antec Perfomance PLUS600 Series User Manual

Download Operation & user’s manual of Antec Perfomance PLUS600 Series Computer Hardware for Free or View it Online on All-Guides.com.

Antec Perfomance PLUS600 Series Operation & user’s manual - Page 1
1
Antec Perfomance PLUS600 Series Operation & user’s manual - Page 2
2
Antec Perfomance PLUS600 Series Operation & user’s manual - Page 3
3
1
Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For more
comprehensive instructions on installing your motherboard and peripherals, please refer
to the user's manuals which come with your components and drives.
PLUS600 Series - Mini Tower Case
The Antec TruePower power supply that comes with this case is equipped with TruePower
circuitry which, among other features, allows the power supply fans to be constantly
monitored and controlled. Based on the demands of your system, the fans will rotate as
slowly as possible to keep noise at an absolute minimum and overall noise will be much
lower than in power supplies equipped with traditional thermally-controlled fans.
Antec Low Noise Technology is a new approach that achieves optimum balance between
noise reduction and necessary cooling. The power supply fans run at the lowest speed
appropriate to load and conditions determined by an advanced temperature response system.
Additionally, your TruePower power supply can control the system case fans. There are
two dedicated fan connectors marked Fan Only from the power supply to connect the
system case fans to. You may connect your case fans to it and have the TruePower control
the speed of the case fans.
Note: Please do not connect more than three external fans to the Fan Only connectors in
any combination. For maximum cooling you may choose to connect the case fans to the
regular 4-pin peripheral connectors, but in this fashion noise will not be reduced.
The power supply comes with a main power switch. Make sure you turn the switch to the
ON ( I ) position before you boot up your computer for the first time. In normal operation
there is no need to turn the switch to the OFF (O) position since the power supply is
equipped with a soft on/off feature which turns your computer on and off through the soft
switch on your computer case. You may need to turn the switch to the OFF position
occasionally should your computer crash and you cannot shut it down through use of the
soft switch.
User’s Manual
PLUS600 Series
Mini Tower Case