Anthem AVM 40 Operating Manual
Download Operating manual of Anthem AVM 40 Amplifier, Home Theater System for Free or View it Online on All-Guides.com.
Brand: Anthem
Category: Amplifier , Home Theater System
Type: Operating manual for Anthem AVM 40
Pages: 86 (2.39 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
57
4.8.10 DYNAMICS
This allows you to control the difference between the softest and loudest passages on 5.1/6.1-channel
soundtracks, as long as the soundtrack contains dynamic scaling information and at least 5.1 speakers are
used. Press DYNAMICS and then use the Master Control Knob or keys on the remote control to select:
Reduced: Allows the quieter parts to be heard more easily, and works by raising the level of quieter
sounds and/or reducing the level of louder ones according to cues encoded on the DVD.
Late Night: Reduces the softest-to-loudest difference even further.
‘Reduced’ and ‘Late Night’ get reset back to ‘Normal’ when Main power is turned off.
4.9 LIP-SYNC DELAY (Remote Control Only)
To adjust Lip-Sync Delay while viewing the picture and listening to the soundtrack simultaneously,
press and hold the DISPLAY key until the display shows “LIP-SYNC DELAY”, then use the keys
to move from digit to digit and the keys to adjust (see section 3.5).
4.10 DISPLAY BRIGHTNESS (Front Panel Only)
The brightness of the Front Panel display and LED indicators can be changed. Press
DISPLAY and then use the Master Control Knob to select Maximum, High, Medium, Low,
or Off. The Front Panel Wake-Up can be modified, as can the time-to-rest when the
display will dim (see section 3.11).
4.11 VIDEO ADJUSTMENTS (Remote Control Only)
S-Video and component video signals containing anomalies may need adjustment before being converted to
digital, for HDMI output. The AVM 40 allows separate adjustment for each Source. To access the adjusment,
press and hold MODE until ‘VIDEO IN GAIN’ appears on the Front Panel display. Pressing MODE again while
this is displayed brings ‘VIDEO IN OFFSET’. A scale appears in the second line of the display:
L |– – – – – + – – – – – H
The vertical bar indicates the adjustment position. Adjust using the keys or Master Control Knob.
Video Input Gain changes the white level – adjust if bright areas are too bright. When set all the way to the
left (Low position), it becomes an automatic gain control – this is the default setting.
Video Input Offset changes the black level – adjust if dark areas are too dark or too bright. The default is the
middle position.
4.12 SLEEP TIMER (Remote Control Only)
If you would like to go sleep while listening to a program or music, the Sleep Timer will automatically
turn the AVM 40 power off after a preselected time. So when you find yourself falling asleep at the TV, take
the Remote Control and:
• Select the desired Path (MAIN, ZONE2, or ZONE3), then press SLEEP (the Sleep timer will operate
for that Path only).
• The first SLEEP keystroke always resets the timer to 30 minutes. Additional keystrokes then cycle
as follows: Second=60, third=90, fourth=Disabled.
• Once set, the time remaining appears as the number following ‘Zzz’ in the display.
4. OPERATION continued …
8
D
I
S
P
L
A
Y
SLEEP
T
I
M
E
R
S