RCA RP5022 User Manual

Download Operation & user’s manual of RCA RP5022 MP3 Player, Voice Recorder for Free or View it Online on All-Guides.com.

Brand: RCA

Category: MP3 Player , Voice Recorder

Type: Operation & user’s manual for RCA RP5022

Pages: 1 (1.56 Mb)

Download RCA RP5022 Operation & user’s manual

RCA RP5022 Operation & user’s manual - Page 1
1
Setting Recording Quality
You can select between two
recording qualities. Default is HQ.
Definition
SP (Standard Play) -
This player allows about 26 hours
recording.
HQ (High Quality) -
This player allows about 4 hours
recording.
1. Press MENU untill
SP or HQ show on
display.
2. Select between SP
and HQ by pressing
REVERSE or
FORWARD.
3. Confirm selection
by pressing MENU
or STOP button.
Setting Recording
Condition
You can select between two
recording conditions. Default is DICT.
Definition
CONF (Conference) - in a more
open area and recording source is
far from the player.
DICT (Dictation) - in a more
enclosed area and recording
source is close to the player.
1. Press MENU until
DICT or CONF show
on display.
2. Select recording
condition by
pressing REVERSE
or FORWARD.
3. Press STOP to
confirm your
selection and exit
to Menu mode.
Setting Recording Mode
You can select between two
recording modes - manual recording
and AVR (automatic voice recording).
1. Manual Recording
1. In STOP mode,
select folder
(A/B/C/D).
2. Press RECORD to
start recording.
(recording time will
be displayed once
you press RECORD)
3. To pause recording,
you can press
RECORD once,
press again to
resume recording.
4. To stop recording, press STOP.
2. AVR (Automatic Voice
Recording)
This feature allows the player to
sense sound and to record only
when you are speaking into the
microphone. When dictation stops
for about three seconds, recording
will stop and then start again
automatically when you resume
dictation.
1. Select destination folder
(A/B/C/D).
2. Press MENU untill AVR flashes on
display.
3. Press REVERSE or FORWARD to
select between AVR on and AVR
off.
4. Press STOP to
confirm your
selection and exit
to STOP mode.
5. Press RECORD to
enter AVR mode.
6. During AVR on recording, adjust
the sensitivity of the microphone
by pressing VOL UP and VOL
DOWN, SEN with sensitivity level
will show on display (e.g. increase
sensitivity level when recording
source is far from the player or
the recording envionment is
quiet.).
7. Start dictation. Recording starts
automatically.
8. Press STOP to end AVR recording.
9. Repeat step 2-3 and select AVR
OFF for de-selection.
Year/Date/12/24/Time
Setting
With this function, you can always
read on the display the recording
date and time of your recorded
messages. Follow the steps below for
time setting.
You can still use this player for
normal recording without setting
the time. However, no correct
recording date and time can be
referred for your recorded messages.
1. Turn on the player.
2. Press MENU repeatedly to enter
Time setting mode.
3. When “YEAR” shows, the digits
of the year flashes
(default is 2007).
Press REVERSE or
FORWARD to
increase/decrease
the number, press
MENU to confirm.
4. Once the year is entered , the
digits in the month
field will flash
(default is 1). Press
REVERSE or
FORWARD to
increase/decrease
the number, press MENU to
confirm.
5. Once the month is entered, the
digits in the day will flash. Press
REVERSE or FORWARD to
increase/decrease the number,
press MENU to confirm.
6. Once the date is
entered, you can
select between
12/24 hour clock
display by pressing
REVERSE
/FORWARD, then press MENU to
confirm.
7. Once the time
format is entered,
the digits in the
hour field will flash
(default setting is
12 (12 hour mode)
& 0 (24 hour mode). Press
Before You Begin
Unpacking Your Player
You should have the following:
one voice recorder
one USB cable
one Digital Voice Management
CD contains software applications
one user manual
Power supply
This player can be operated by 2
“AAA” batteries.
Installing Batteries
(not included)
1. Slide the battery compartment
door to open.
2. Insert the two supplied “AAA”
batteries with polarities matching
indications.
3. Replace the battery compartment
door.
Refer to the battery level
indicator on display for
batteries level. Replace with new
batteries when the indicator is
empty.
Auto power shut down
The player will be automatically
turned off if left idle for three
minutes.
Using earphones and
external microphone
When earphones are connected,
sound output from speaker will
be muted.
When external microphone is
connected, no record can be
made from built-in microphone.
Starting up the player
Press and hold PLAY to turn on the
player.
Keys lock
This feature avoids accidental key
activation during recording or
playback.
1. Press and hold MENU for three
seconds, LOCKED will flashes on
display. (LOCK icon will be
shown)
2. Press and hold MENU for three
seconds again to unlock keys.
Tones
You can activate this feature so that
beep sound can be heard whenever
you press on any button except
during playback and recording.
1. Press MENU button repeatedly
until TONE shows on display.
General ControlsGeneral Controls
General Controls
FCC Information FCC Information FCC Information
Using the Digital Voice
Manager
The RCA Digital Voice Manager can
perform playback, organize your
bookmarks of the recorded files and
create self-executable voice file from
the recorded files.
Launching the Software
1. To launch the software, click
"Start", select "All Programs",
select "Digital Voice Recorder",
then select "RP5022" and then
select "Digital Voice Manager".
2. All the drives in the computer
except the removable Digital
Voice Recorder are shown in the
top while the removable Digital
Voice Recorder is shown in the
bottom.
Playback and Editing Operations
1. To organize your files, click the
corresponding buttons to cut,
delete, copy and paste a file(or by
drag and drop).
2. To play the recorded files,
highlight the file and click the
PLAY/PAUSE button on the left
of the toolbar.
3. Adjust the volume on the right of
the toolbar.
Click the corresponding buttons
in the toolbar to fast
backward/forward, skip to a
specific time in the file and stop
playback of a recorded file.
To adjust the playback speed, click
"Normal Speed" and select
desired speed from the pull down
menu.
REVERSE or FORWARD to
increase/decrease the number,
press MENU to confirm.
8. Once the hour field is entered,
the digits in the minute field will
flash. Press REVERSE or
FORWARD to increase/decrease
the number, press STOP to
confirm your selection and exit to
Menu mode.
For Your Records
In the event that service should be
required, you may need both the
model number and the serial
number. In the space below, record
the date and place of purchase, and
the serial number:
Model No.
Date of Purchase
Place of Purchase
Serial No.
FCC Information
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
In accordance with FCC
requirements, changes or
modifications not expressly approved
by Thomson Inc. could void the user’s
authority to operate this product.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures
Reorient or relocate the receiving
antenna.
Increase the separation between
the equipment and receiver.
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Consult the dealer or an
experienced radio/TV technician
for help.
Also, the Federal Communications
Commission has prepared a helpful
booklet, "How To Identify and
Resolve Radio TV Interference
Problems." This booklet is available
from the U.S. Government Printing
Office, Washington, DC 20402. Please
specify stock number 004-000-00345-
4 when ordering copies.
The descriptions and characteristics
given in this document are given as a
general indication and not as a
guarantee. In order to provide the
highest quality product possible, we
reserve the right to make any
improvement or modification
without prior notice. The English
version serves as the final reference
on all products and operational
details should any discrepancies arise
in other languages.
Service Information
This product should be serviced only
by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this Guide.
Ecology
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into
specially designed receptacles.
Maintenance
Clean the unit with a soft cloth, or a
damp chamois leather. Never use
solvents.
Precautions for the Unit
Do not use the unit immediately
after transportation from a cold
place to a warm place;
condensation problem may be
resulted.
•Avoid shock to the unit especially
during recording. Recorded data
can be damaged.
Do not store the unit near fire,
places with high temperature or
places with direct sunlight.
Do not operate or store unit in
places with frequent static
electricity or electrical noise (e.g.
speaker, TV set).
•Clean the unit with a soft cloth or
a damp chamois leather. Never
use solvents.
The unit must only be opened by
qualified personnel.
• Do not expose this appliance to
rain or moisture.
Precautions for Batteries
•If you do not use the unit for
more than one month, be sure to
remove the batteries to avoid
leakage.
When installing batteries, be sure
that the polarities are correct.
Reversing polarity may cause
personal injury and damage to
the batteries.
Never mix new batteries with old
ones. Do not mix battery types.
Discard leaking batteries
immediately. Leaking batteries
can cause skin burns or other
personal injury.
Do not dispose of in fire.
Do not charge batteries which are
not intended to be recharged.
Power Supply
(battery power) 2 x “AAA”
ESD Remark:
In case of misfunction due to
electrostatic discharge just reset the
product (disconnect and reconnect
of the power source may be
required) to resume normal
operation.
Select folder
You can select a specific folder
(A/B/C/D) for browsing. Default is
folder A.
1. Press MENU in stop
mode.
2. Folder A, B, C or D
icon will flash.
3. Press REVERSE or
FORWARD to
select a folder.
4. Press STOP to exit
to stop mode in
the desired folder.
Select file
You can select a specific file for
playback.
1. Select the folder you need.
2. Press REVERSE or FORWARD to
select the file you want. If the file
you want is in the current folder,
you can press REVERSE or
FORWARD to select it directly in
stop and play mode.
Normal Playback
1. In Stop mode,
select a folder
(A/B/C/D).
2. Select file by
pressing REVERSE
or FORWARD.
3. Press PLAY to start playback.
4. Press PLAY to pause playback,
press again to resume.
5. You can press VOL UP (+) or VOL
DOWN (-) to adjust listening
volume.
6. Press and hold REVERSE or
FORWARD to make quick search
within a file.
7. Press REVERSE or FORWARD
once to skip one file forward or
backward.
8. Press STOP to stop playback.
Creating a bookmark
This feature allows you to create an
interception point in the recorded
message for quick reference.
1. During playback, press REC once
to set a bookmark, the bookmark
icon flashes on the display.
2. You can create multiple
bookmarks until the memory is
full.
Skipping to a bookmark
You can skip to a bookmark anytime
during playbcak.
1. During playback, press FORWARD
to go to the bookmark (if
available).
2. Press FORWARD again to go to
the next bookmark.
Deleting a bookmark
1. Select folder (A/B/C/D)
2. Select file.
3. Press ERASE once and DELETE
will flash on the screen.
4. Press and hold PLAY for 3 seconds
to confirm deleting. (or press
STOP to cancel erasing file)
Display Messages
Setting the Time
Setting the Time
Basic Operation
Bookmark
RCA
RP5022
Equipment tested for
compliance as a
complete unit
RP5022
It is important to read this instruction book prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
User manual
Guide de l’utilisateur
Thomson Inc.
P. O. Box 1976, Indianapolis, IN 46206-1976
©2007 Thomson Inc.
Trademark(s) © Registered
Marca(s) © Registrada(s)
Marque(s) © Deposée(s)
www.rcaaudiovideo.com
Printed in China/Impreso en China
5642963A (EN/F)
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
Transfer Files with the
Digital Voice Manager
(Voice Files Only)
Your player is associated with a drive
letter. You can drag the voice files
you want to transfer to your player
to the A/B/C/D folder in the drive.
Your files can be found in these
folders in the player once it is
disconnected from the computer.
You can also drag the voice files you
want to transfer from the A/B/C/D
folder in the drive to your computer.
Using your player as a file
storage device
The player can function as a
detachable data storage device. You
can take along your favorite pictures
and documents wherever you go.
Simply cut-and-paste or drag-and-
drop files to or from it via USB
connection, the player will appear as
a removable drive in Windows
Explorer.
Disconnecting from the
Computer
After you have copied files to or
from the player, you can disconnect
the player from the computer.
1. Click the icon from the
System Tray and select "Unplug or
Eject hardware". Select the drive
corresponding to your player.
2. The "Stop a Hardware player"
screen will appear. Select the
player to be stopped again for
confirmation and click OK.
3. Now you can disconnect the
player from the computer. If you
want to go back to USB mode for
file transfer at this stage, you
need to unplug and connect the
player to the PC again.
What your warranty covers:
Defects in materials or workmanship.
For how long after your purchase:
One year from date of purchase.
The warranty period for rental units begins with the first rental or 45 days from
date of shipment to the rental firm, whichever comes first.
What we will do:
Provide you with a new, or at our option, a refurbished unit. The exchange unit
is under warranty for the remainder of the original product’s warranty period.
Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the product is within the warranty period must be presented to
obtain warranty service. For rental firms, proof of first rental is also required.
How to make a warranty claim:
Properly pack your unit. Include any cables, etc., which were originally provided
with the product. We recommend using the original carton and packing
materials.
Include evidence of purchase date such as the bill of sale. Also print your name
and address and a description of the defect. Send via standard UPS or its
equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
Insure your shipment for of loss or damage. Thomson accepts no liability in case
of damage or loss en route to Thomson.
Pay any charges billed to you by the Exchange Center for service not covered by
the warranty.
A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
Customer instruction. (Your Owner’s Manual provides information regarding
operating Instructions and user controls. For additional information, ask your
dealer.)
Installation and set-up service adjustments.
• Batteries.
Damage from misuse or neglect.
Advanced operation Connecting to the Computer
Connecting to the Computer Connecting to the Computer
Connecting to the Computer
Connecting to the Computer
Troubleshooting tips
U.S. Limited Warranty
U.S. Limited Warranty
Canadian Limited Warranty Note
Cut
You can erase unwanted parts from
your recording.
1. Select folder.
2. Select file.
3. Start playback of
the file with the
unwanted part.
4. Press ERASE to
mark the start of
the unwanted
part, “CUT-S”
shows on display.
5. Press ERASE to
mark the end of
the unwanted part, “CUT-E”
shows on display.
6. Press ERASE again to confirm
cutting (or press STOP to cancel)
7. “WAIT” will show on the display.
8. When the memory
rearrangement is completed, the
player will continue playback.
Format
(Caution! All data inside the memory
will be erased)
You can format the internal memory
when needed. (e.g. compatability
problem, etc.)
The procedures are as follow:
1. Turn on the player.
2. Press ERASE,
“DELETE” will flash
on the display.
3. Press and hold REC
for three seconds,
“FORMAT” will
flash on the
display.
4. Press and hold
ERASE, “WAIT”
will show on the display,
formatting is in process.
6. After the formatting is
completed, the remain time of
the selected memory will show on
the display.
Computer System
Requirements
Pentium III 500MHz or higher
recommended
•Windows® 98SE, Windows ME,
Windows 2000 (Service Pack 3), or
Windows XP (Service Pack 1)
64MB RAM (128 MB
recommended)
USB port 1.1 or 2.0
Installing the Digital Voice
Manager
1. Turn on your computer and
insert the Digital Voice
Management CD into the CD
drive.
2. If the setup screen does not
appear, double-click My
Computer, double click your CD
drive icon, and double click
"Install" to run the installer.
3. Follow the on-screen instructions
to install the software. If your
computer is running Windows
98SE, the installer will install the
USB driver automatically for
recognizing the player.
4. After installation is completed,
reboot your computer.
Connecting to the
Computer
Connect the player before launching
the Digital Voice Manager.
1. Connect the USB cable provided
to the player's USB jack and
connect the other end to your
computer's USB port.
2. "PCLINK" shows on the player's
display. The player appears as a
removable drive in your
computer.
4. To skip to a bookmark, select
"Play" from the menu at the top,
then select "Goto Bookmark" and
select your desired bookmark.
To edit bookmarks, click the
corresponding buttons to add or
clear the bookmarks.
Creating and Playing
Self-executable File
You can play the created file
independently without the Digital
Voice Management software.
1. Highlight a recorded file, click
.
2. Select the destination folder from
the pop up window and click
"Save".
3. Go to the destination folder and
double-click the created file.
4. Click "Play" to start playback.
Adjust the volume on the right.
Creating Wave File
Self-executable file may be blocked
by some e-mail filters. You may
select to create wave file if you want
to send your recorded message by
e-mail.
1. Highlight a recorded file, click
.
2. Select the destination folder from
the pop up window and click
"Save".
3. The created file could be found in
the destination folder.
Player doesn’t turn on
Check that batteries are properly
inserted and not exhausted.
Make sure battery compartment
door is properly closed.
Make sure LOCK function is not
activated.
Display keeps flashing when
player is off
You may not have set the time.
Refer to section on Time Setting.
Cannot record
Make sure LOCK function is not
activated.
Make sure memory is not full.
You have recorded 99 files in one
folder. Try record in a new folder.
If you select external memory,
please ensure that an external
memory card is properly inserted.
Cannot show recording date and
time during playback
You may have not set the date
and time before recording. Refer
to section ‘Time Setting’.
No sound from speaker during
playback
Make sure volume is not set to 0.
Headphones should not be
connected.
Cannot edit
Make sure LOCK function is not
activated.
Cannot activate the player after
pressing on keys
There may be software problems.
Remove the batteries to reset the
player.
Recordable time becomes shorter
You may have set the recording
quality to ‘High Quality’, refer to
section ‘Setting Recording
Quality’.
Cannot perform playback
Make sure you have selected
folder with recorded messages.
Make sure LOCK function is not
activated.
Cannot erase recorded file(s)
Make sure you follow each step
under section “Erasing Selected
File” carefully.
Cannot stop recording when AVR
ON
If AVR ON sensitivity is set to
HIGH, recording may not be
stopped in noisy environment. Try
setting the sensitivity to LOW.
Cannot keep the saved setting
If the batteries are removed,
saved settings may be removed.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of nature, such as but not limited to lightning damage.
Limitation of Warranty:
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PAR TICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF
WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF
THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other rights
that vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
Thomson multimedia Ltd. warrants to the purchaser or gift recipient that if any
manufacturing defect becomes apparent in this product within 1 year from the
original date of purchase, it will be replaced free of charge, including return
transportation.
This warranty does not include damage to the product resulting from accidents,
misuse or leaking batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with
accessories in the original carton (or equivalent). Mail prepaid (with proof of
purchase) and insured to:
Thomson multimedia Ltd.
6200 Edwards Blvd.,
Mississauga, Ontario L5T 2V7
Canada
The provisions of this written warranty are in addition to and not a modification of or
subtraction from the statutory warranties and other rights and remedies contained in
any applicable legislation, and to the extent that any such provisions purport to
disclaim, exclude or limit any such statutory warranties and other rights and remedies,
such provisions shall be deemed to be amended to the extent necessary to comply
therewith.
If you are unable to find a qualified servicer for out of warranty service, you may
write to:
Thomson Inc.
P. O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
Attach your sales receipt to this booklet for future reference. This information is
required if service is needed during the warranty period.
PURCHASE DATE
NAME OF STORE
CAUTION
The edit function does not
operate when battery power is
too low.
After editing a message, “WAIT”
will be displayed. Do not power
off the player until “WAIT”
disappears. Otherwise, the
memory which is rearranging
could not be read or release until
the player is formatted.
Speed
You can adjust the
playback speed.
1. Select folder.
2. Select file.
3. Start playback.
4. Press PLAY to start
playback.
5. During playback,
press MENU once,
“SPEED” will be shown on display.
6. Press REVERSE or FORWARD to
select between FAST and SLOW.
7. Press PLAY to confirm and exit.
Insert
You can insert new segments into a
file without erasing previously
recorded content.
1. Select folder.
2. Select file for inserting new
segment.
3. Press PLAY to start
playback. Press
REVERSE or
FORWARD to scan
to the point that
you want to insert
new segment.
4. Press MENU twice to start
recording new segment, “INSERT”
will be shown on display. Press
RECORD within three seconds.
5. Press STOP to stop recording.
Append
Yo u can add appendix (e.g.
reminder, supplementary
information) to the end of the file.
1. Select folder.
2. Select file for
adding appendix.
3. Press PLAY to start
playback.
4. Press MENU three
times, “APPEND”
will be shown on
display. Press RECORD within
three seconds to start recording
appendix.
5. Press STOP to stop recording.
6. “WAIT” will show on the display.
7. After the memory rearrangement
completed, the player will go to
STOP mode.
Advanced operation
Advanced operation
Note:
"ALL" is displayed if you are at
the first file and press REVERSE
or last file and press FORWARD.
See IntroScan for more detail.
IntroScan
This feature allows playback of the
beginning three seconds of each file
in a folder.
1. Select folder
(A/B/C/D) and file.
2. Press REVERSE or
FORWARD until
ALL shows on
display
3. Press PLAY to start
introductory
playback, INTRO
shows on display.
4. Press STOP to exit
Intro Scan sooner.
Play one/all
You can choose to play a specific file
or all files in a folder.
1. In STOP mode, press MENU
repeatedly until ONE or ALL
shows on the display.
2. Press REVERSE or FORWARD to
select between ONE and ALL.
3. Press STOP to confirm your
selection and exit to Menu mode.
Recording Mode
Recording Mode
Erasing selected file
You can delete a file by the
following steps:
1. Select folder (A/B/C/D)
2. Select file.
3. Press ERASE once and DELETE
will flash on the screen.
4. Press and hold ERASE for three
seconds to confirm deleting. (or
press STOP to cancel erasing file)
Erasing all files in a folder
You can delete all files in a specific
folder by the following steps:
1. Turn on the player.
2. Select a folder (A/B/C/D).
3. In Stop mode, press FORWARD
continuously until “ALL” appears
on the display.
4. Press ERASE and “DELETE” will
flash on the display.
5. Press and hold ERASE for about
three seconds, all files in the
selected folder will be erased
completely (or press STOP to
cancel erasing all files).
Other functions
Erasing file/folder
Tip:
• You can record up to 99 files
in one folder, not exceeding
396 files in total. When the
maximum limit is reached,
“FULL” will be shown.
The first syllable or two may be
lost when you start recording
because this ‘sound’ is used to
turn on the AVR feature. It is a
good pratice to make some
‘sounds’ or say a short word to
activate the AVR before you
begin actual dictation.
To view the remaining time
and other recording
information, you may press and
hold PLAY during recording.
Built-in
microphone
Recording
indicator
VOL UP:
Volume up
VOL DOWN:
Volume down
MENU: Folder,
record condition,
record quality,
AVR on/off,
speed, play
condition, beep
tone, set
year/day/12/24/
time, key lock
on/off
External
microphone
jack
USB jack
Connects
earphones
Folder
(A/B/C/D)
File selected
Total number of
files in a folder
Bookmark
Play
Record
Total
remaining
time for
recording
Battery level
indicator
Key Lock
AM/PM
Recording
Conditions
Automatic
Voice
Recording
Recording
Qualities
Time/date/
recorded time
ALL
APPEND
CUT-E
CUT-S
DELETE
FULL
MM/DD
12 HOUR
TIME
INSERT
INTRO
OFF
ON
SEN MI
TONE
NO TONE
VOL 15
YEAR
LOCKED
FORMAT
SPEED
WAIT...
PCLINK
Select all (Introductory Play back & Erasing All Files)
Appendix (Adding Appendix)
Cut End (Cutting)
Cut Start (Cutting)
Delete (Erasing Selected File)
Memory full
Month / day entry mode.
12 hour time display mode.
Time entry mode
Insertion (Inserting New Segments)
Introduction (Introductory Playback)
Off (Automatic Voice Recording)
On (Automatic Voice Recording)
Sensitivity Level (AVR)
Beeping sound on(Setting Beep Sound)
No beeping sound (Setting Beep Sound)
Volume (Setting Volume)
Year (Setting Year)
Key locked
Format the memory
Speed of playback
Memory rearrangement/System is busy
Player is connected to the computer
REC: starts / pauses
recording.
PLAY: turns the
player on. Starts/
pauses playback.
REVERSE: skips and
searches backward.
Selects/Browses
under menu mode.
STOP: stops
playback/ recording.
Turns off the player.
FORWARD: skips
and searches
forward.
Selects/Browses
under menu mode.
Playback
mode:
Play one/
Play all
AM
AM
A
B
REMAIN
SP
ONE
DICT
AM
A
MM
DD
SP
ONE
DICT
MM
DD
AM
A
SP
ONE
MM
DD
A
FAST
SP
ONE
AM
A
SP
ONE
AM
A
SP
ONE
DICT
MM
DD
A
SP
ONE
DICT
MM
DD
A
SP
AM
A
SP
AM
A
SLOW
Tip:
If the file have multiple
bookmarks, steps 1-4 will
delete ALL bookmarks.
You can create up to 30
bookmarks in a file. When the
maximum limit is reached,
“FULL” will be shown.
If there are bookmarks in a
file, pressing FORWARD will
go through the bookmarks
first before skipping to the
next file.
If there are bookmarks in a
file, pressing BACKWARD
twice if you want to skip to the
previous file.
AVR
AVR
SP
DICT
AVR
AM
A
SP
DICT
CONF
HQ
Tip:
File numbers that come after
erased one will be moved
forward by one automatically.
ERASE:
Erases file
2. Press REVERSE or FORWARD to
set beep sound ON/ OFF.
3. Press MENU to confirm selection.
Removable
Digital Voice
Recorder
All drives in the
computer
adjust volume
cut copy paste delete
play/pause
skip
backward
skip to a
specific
time
skip
forward
stop add bookmark
clear book mark
Before You Begin
Tip:
• For conferences, to obtain
optimum recording quality,
place the recorder with the
microphone freely exposed to
the sound source as close as
convenient. A built-in
automatic recording level
control will set the optimum
record level during manual
recording. Avoid recording near
unwanted noise sources, such
as air conditioners or fans.
If power supply from the
battery fails suddenly (e.g.
batteries are removed
accidentally) during recording,
the memory which is allocated
for recording could not be read
or release. To release the
memory, backup your files and
format the player.
Recording Mode
Note:
During recording, the
recording indicator lights. When in
AVR standby mode or when
recording is paused, the recording
indicator flashes.
Tip:
Make sure play all files is not
selected. Inserting new
segments, adding appendix
and cutting cannot be
performed when play all files is
selected.
Inserting new segments,
adding appendix and cutting
will only update the recorded
time length, without changing
recording time and date.
All bookmarks will be deleted
after inserting new segments,
adding appendix or cutting is
performed.
Removable
Digital Voice
Recorder
All drives in the
computer
WARNING: TO PREVENT FIRE
OR ELECTRICAL
SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est
conforme à la norme du NMB-003 du Canada
(v2.0)
Tip:
When in Menu mode or during
playback or recording,
connection between the player
and the computer could not be
established. Quit the above
modes before connecting to
the computer.
Data transfer is possible even if
no batteries are installed in the
player.
Do not disconnect the USB
connection during files transfer.
Note:
Do not rename, delete and
transfer (drag-and-drop) voice files
to your player directly in Windows
Explorer. Use the Digital Voice
Manager to rename, delete and
transfer voice files.
RP5022 EN (A ver) 2/2/07 6:07 PM Page 1