RCA RP5400 User Manual

Download Operation & user’s manual of RCA RP5400 Clock Radio, Radio for Free or View it Online on All-Guides.com.

Brand: RCA

Category: Clock Radio , Radio

Type: Operation & user’s manual for RCA RP5400

Pages: 1 (0.27 Mb)

Download RCA RP5400 Operation & user’s manual

RCA RP5400 Operation & user’s manual - Page 1

Vue arrière

VOLUME - Permet d’ajuster le

volume sonore.

HI BRIGHTNESS - Règle la

luminosité de l’affichage.

Réglage de l’horloge

1. Glissez l’interrupteur LOCK / WAKE

1 / WAKE 2 / TIME à la position

TIME pour passer en mode de

réglage de l’horloge.

2. Appuyez sur les touches REV

ou FWD pour régler l’heure.

Gardez appuyées ces touches

pour un balayage accéléré avant

ou arrière de l’heure.

3. Glissez l’interrupteur LOCK / WAKE

1 / WAKE 2 / TIME à la position

LOCK pour verrouiller.

Sleep Mode

In sleep mode, the unit will turn off

automatically after a specified time.

Setting Sleep Time

1. Press SLEEP then the time display will

exhibit 0:59 and the radio will turn on.

2. While holding Sleep, press REV

or FWD to set the sleep time.

3. Release SLEEP and the display reverts

to current time.

Display

AM - AM time indicator.

1 - Wake 1 to tone.

1 - Wake 1 to radio.

NAP - Nap is activated.

2 - Wake 2 to tone.

2 - Wake 2 to radio.

Ecology

Help protect the environment -

we recommend that you

dispose of used batteries by

putting them into specially

designed receptacles.

Maintenance

Clean the unit with a soft

cloth, or a damp chamois

leather. Never use solvents.

General Controls

Radio Utiliser l’horloge

Utiliser l’horloge

Avant de commencer

Français

Utiliser l’horloge

Note

Before You Begin Before You Begin

General Controls General Controls

Radio

It is important to read this instruction book prior to using your new product for the first time.

user

manual

Before You Begin

Important InformationFCC Information

English

EN/F/E

Operating the Clock

WARNING:

TO PREVENT FIRE

OR ELECTRICAL

SHOCK HAZARD,

DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

THE LIGHTNING

FLASH AND ARROW-

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

"DANGEROUS

VOLTAGE" INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER

(OR BACK). NO USER-

SERVICEABLE PARTS IN-

SIDE. REFER SERVICING

TO QUALIFIED SERVICE

PERSONNEL.

• Make sure that you keep

your set away from water

and high temperatures.

• Do not use your System immediately

after transporting it from a cold place

to a warm place, as condensation may

cause the system to malfunction.

• Keep your unit away from humid

areas and abnormally hot places.

• To prevent personal injury, do not

reverse any batteries.

• The use of apparatus in moderate

climates.

• The apparatus shall not be exposed to

dripping or splashing and that no

objects filled with liquids, such as

vases, shall be placed on the

apparatus.

• No naked flame sources, such as

lighted candles, should be placed on

the apparatus.

• Attention should be drawn to the

environmental aspects of battery

disposal.

• Minimum distances (2cm) around the

apparatus for sufficient ventilations.

• The ventilation should not be

impeded by covering the ventilation

opening with items, such as

newspaper, table-cloths, curtains, etc.

• The rating plate is located at the

bottom cabinet of apparatus.

Battery Back-Up Operation

The power failure protection circuit will

not operate unless battery is installed.

When the battery backup functions, the

digital display will not light, however,

the wake function still occurs during the

power interruption if remaining battery

power is adequate.

Normal operation will resume after AC

power is restored so you will not have to

reset the time or wake.

Install battery as follow:

1. Remove battery compartment door

(located at the bottom of the radio)

by applying thumb pressure to the

tab on battery door and then lift the

door out and off the cabinet.

2. Connect a 9-volt battery (not

supplied) to the connector plug.

3. Replace the compartment door.

Power Failure Indicator

When AC power is interrupted

(disconnected) for a short period of time,

both time and alarm settings will change

(unless battery is installed). After AC

power is restored (reconnected), the

Digital Display will blink to indicate that

power was interrupted and you should

readjust the time and alarm settings.

Note:Note:

Note:

Alkaline (NEDA 1604A/IEC 6LR61)

batteries are recommended.

Carbon-zinc battery may be used

but memory holding time will be

substantially reduced. Memory

holding time for a fresh alkaline

battery is approximately 8 hours (if

radio or alarm are not operated)

which should take care of short,

nuisance-type AC power failures. To

preserve battery life, the unit

should remain plugged into an AC

outlet. As the battery gets older,

its voltage drops and memory may

be lost. Be sure to replace the

battery periodically. Battery should

be removed if the unit will be

stored for more than one month.

Leaky battery can badly damage

the clock radio.

Left View

Radio band AM/FM - Selects between

FM and AM radio band.

< TUNING >- Tunes radio frequency.

Top View

ON/OFF - Turns radio on and off.

SLEEP - Activates sleep function.

REV - Decreases clock time in clock,

wake, snooze, sleep and nap setting

mode.

SNOOZE - Enters snooze mode where

the alarm will quiet but will sound

again once the snooze period is over.

FWD - Increases clock time in clock,

wake, snooze, sleep and nap setting

mode.

NAP - Activates nap function.

WAKE 1 - Activates Wake 1 settings

and changes wake 1 mode.

WAKE 2 - Activates Wake 2 settings

and changes wake 2 mode.

LOCK / WAKE 1 / WAKE 2 / TIME -

Selects wake setting mode, clock setting

mode and lock mode.

Right View

VOLUME - Adjusts volume level.

HI BRIGHTNESS - Adjust

display brightness

Turni ng on/off the Radio

Press the ON/OFF button on the top of the

unit to turn on the radio.

Press again to turn off the radio.

Selecting Bands

Slide the band switch on the side of the

unit to select between AM and FM band.

Tuning to Stations

Turn the < TUNING > knob on the side of

the unit to tune up and down radio

frequency.

Built-In AFC

The Built-In Automatic Frequency

Control (AFC) works only on FM. It

helps to reduce drift on FM reception

and to keep the radio locked in on the

FM station to which it is tuned.

Antennas

AM Antenna - A built-in ferrite rod

antenna eliminates the need for an

outside antenna for AM reception.

Rotating the unit slightly may improve

reception of distant AM stations.

FM Antenna - The power cord acts as

your FM antenna. The power cord

picks up moderate to strong stations

and eliminates the need for an

external antenna in most strong signal

areas. Be sure the power cord is

stretched out to its full length. Do not

coil or bunch the cord together.

Changing position of the power cord

may improve reception.

Setting Clock

1. Slide the LOCK / WAKE 1 / WAKE 2 /

TIME switch to TIME to enter clock

setting mode.

2. Press REV or FWD to set the

time.

Press and hold the respective buttons

to fast reverse or fast forward clock

time.

3. Slide the LOCK / WAKE 1 / WAKE 2 /

TIME switch to lock.

Setting Wake Time

Your digital clock operates on a 12-hour

standard mechanism. The AM indicator

lights to show am time.

1. Slide the LOCK / WAKE 1 / WAKE 2 /

TIME switch to select WAKE 1 or

WAKE 2 setting mode.

2. Press REV or FWD to set wake

time.

Press and hold REV or FWD to

fast search reverse or forward wake

time.

3. Slide the LOCK / WAKE 1 / WAKE 2 /

TIME switch back to the lock position.

Selecting Wake Source

Press WAKE 1 or WAKE 2 repeatedly to

select wake source for the corresponding

wake setting (tone / radio ).

The respective wake indicator lights when

the wake function is activated.

Note:Note:

Note:

The unit equips with

GRAD-U-WAKEGRAD-U-WAKE

GRAD-U-WAKE feature, the

alarm tone volume will increase

gradually to its maximum in

about 30 to 45 seconds.

Tip:Tip:

Tip:

If you set SLEEP function with low

volume level before going to bed,

we advise using Wake to tone

mode to wake you up since its

volume will automatically increase.

Wake to Tone

When wake to tone is selected, the green

indicator lights beside the icon.

Wake to Radio

When wake to radio is selected, the green

indicator lights beside the icon.

Setting Wake Station

1. Select radio band.

2. Select desired station.

3. Adjust the volume by turning VOLUME.

Note:Note:

Note:

When you turn off the alarm by

pressing

ON/OFFON/OFF

ON/OFF, the alarm will

turn on at the same time

tomorrow.

Turni ng off Alarm

Silence the alarm momentarily

Press SNOOZE or any one of the

SmartSnooze

buttons ( SLEEP /

REV / FWD / NAP ). The

alarm will sound again when the snooze

period is over. (see “SmartSnooze

Operation”).

Stop the alarm

Press ON/OFF. Then, the alarm will be on

the following day at the same time.

Note:Note:

Note:

The sleep time range is from 1

minute to 2 hours. (the default

time is 59 minutes)

Operating the Clock

Nap Mode

This function wakes you up after a short

period of time. Only alarm sound can be

selected for Nap.

1. Press and release the NAP button.

The green indicator beside the Nap

icon flashes.

2. During this period, adjust nap time

by pressing REV or FWD .

3. Press NAP to confirm nap time or if

no button is pressed after 5 seconds,

the clock will be shown. The green

NAP indicator lights.

Note:Note:

Note:

The nap range is from 10 minutes

to 2 hours. (the default time is

20 minutes)

Tip:Tip:

Tip:

Nap time increases and

decreases at an interval of 10

minutes.

Note:Note:

Note:

When

SLEEP SLEEP

SLEEP is activated again,

the sleep time will be the same as

the one you have set before.

Sleep to Radio

The radio is turned on after step 1 in

Setting Sleep Time and you may select the

station as usual. The radio will turn off

when the preset time elapses.

If you decide to turn off the radio sooner,

press SNOOZE or ON/OFF.

View Remaining Sleep Time

Press SLEEP to read the remaining

sleep time.

Operating the Clock

Note:Note:

Note:

Nap will not be activated again

the following day at the same

time.

Nap alarm is equipped with

GRAD-U-WAKEGRAD-U-WAKE

GRAD-U-WAKE feature.

View NAP time

Press NAP once to show time left.

Cancel NAP

Press and hold NAP until the green Nap

indicator turns off and the current time

shows on the display.

Stop the Nap alarm

Press NAP or follow “Turning off Alarm”.

Snooze function can be used repeatedly up

to 2 hours. After this, the alarm will turn

off until the next alarm conditions are met.

Set the “quiet” period as follow:

1. Press and hold SNOOZE.

2. Press REV or FWD to adjust

snooze time. Release button, then, the

“quiet” period is set.

RP5400

FCC Information

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

In accordance with FCC requirements, changes

or modifications not expressly approved by

Thomson Inc. could void the user’s authority

to operate this product.

This device generates and uses radio frequency

(RF) energy, and if not installed and used

properly, this equipment may cause

interference to radio and television reception.

If this equipment does cause interference to

radio or television reception (which you can

determine by unplugging the unit), try to

correct the interference by one or more of the

following measures:

• Re-orient the receiving antenna (that is, the

antenna for the radio or television that is

“receiving” the interference).

• Move the unit away from the equipment

that is receiving interference.

• Plug the unit into a different wall outlet so

that the unit and the equipment receiving

interference are on different branch circuits.

If these measures do not eliminate the

interference, please consult your dealer or an

experienced radio/television technician for

additional suggestions. Also, the Federal

Communications Commission has prepared a

helpful booklet, “How To Identify and

Resolve Radio TV Interference Problems.”

This booklet is available from the U.S.

Government Printing Office, Washington, DC

20402. Please specify stock number 004-000-

00345-4 when ordering copies.

For Your Safety

The AC power plug is polarized (one blade is

wider than the other) and

only fits into AC power

outlets one way. If the plug

will not go into the outlet

completely, turn the plug

over and try to insert it the

other way. If it still does not

fit, contact a qualified electrician to change

the outlet, or use a different one. Do not

attempt to bypass this safety feature.

For Your Records

In the event that service should be required,

you may need the model number. In the

space below, record the date and place of

purchase:

Date of Purchase:

Place of Purchase:

Service Information

This product should be serviced only by

those specially trained in appropriate

servicing techniques. For instructions on

how to obtain service, refer to the

warranty included in this Guide.

Technical Information

Product: Clock Radio

Brand: RCA

Model: RP5400

Electrical Consumption

Power Supply: 120V ~ 60Hz

Power Consumption: 4 Watts

IMPORTER

Comercializadora Thomson de México, S.A. de

C.V.

Álvaro Obregón No. 151. Piso 13.

Col. Roma. Delegación Cuauhtémoc

C.P. 06700. México, D.F.

Telefono: 52-55-11-020360

RFC: CTM-980723-KS5

The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and

not as a guarantee. In order to provide you with the highest quality product, we may make changes or

modifications without prior notice. The English version serves as the final reference on all product and

operational details should any discrepancies arise in other languages.

Note:Note:

Note:

Power is fed to the unit even when

it is not functioning. To cut the

power supply off, the power cable

must be unplugged.

Plugging In For Power

AC OUTLET POWER SUPPLY:

120V~60Hz

For Your Safety

The AC power plug is

polarized (one blade is

wider than the other)

and only fits into AC

power outlets one way.

If the plug will not go

into the outlet completely,

turn the plug over and try to insert it the

other way. If it still does not fit, contact

a qualified electrician to change the

outlet, or use a different one. Do not

attempt to bypass this safety feature.

Tip:Tip:

Tip:

The “:” flashes on the display in

clock setting mode.

Note:Note:

Note:

The clock is in 12 hour format.

The AM indicator lights to show

am time.

Tip: Tip:

Tip:

The “:” flashes on the display in

wake time setting mode.

Tip:Tip:

Tip:

You can activate the previously set

alarm time by pressing the

WAKE WAKE

WAKE

1 1

1 or

WAKE 2 WAKE 2

WAKE 2 button.

Note:Note:

Note:

When AC power is interrupted

and the unit is operating through

the DC backup batteries, all wake

mode will work with buzzer

instead.

Avant de commencer Avant de commencer

EXPORTER

Thomson Inc.

P.O. Box 1976,

Indianapolis, IN 46206-1976

@2005 Thomson Inc.

56273540 (EN/F/E)

www.rca.com

Printed in China/Impreso en China

IMPORTADOR

Comercializadora Thomson de México, S.A. de C.V.

Álvaro Obregón No. 151. Piso 13.

Col. Roma. Delegación Cuauhtémoc

C.P. 06700. México, D.F.

Telefono: 52-55-11-020360

RFC: CTM-980723-KS5

Note:Note:

Note:

The “quiet” period is from

1 minute to 30 minutes. (the

default time is 9 minutes)

Snooze

Operation

This operation allows extra sleep time after

the alarm is on.

The alarm can be turned off temporary by

pressing SNOOZE or any one of the

SmartSnooze

buttons until the snooze

period is over.

SmartSnooze

buttons include:

SLEEP / REV / FWD / SNOOZE /

NAP

Tip:Tip:

Tip:

SmartSnooze

will be

activated only when the

LOCK /LOCK /

LOCK /

WAKE 1 / WAKE 2 / TIMEWAKE 1 / WAKE 2 / TIME

WAKE 1 / WAKE 2 / TIME

switch slides to

LOCKLOCK

LOCK.

- VOLUME +

LO HI

•

BRIGHTNESS

< >

TUNING

FM 98.0 MHz

AM 106.0 x10kHz

Radio Band

AM/FM

1 2

AM NAP

1 2

Spécifications FCC

la réception radio ou télévisée (vérifier en

débranchant l’appareil), tenter d’éliminer

l’interférence des façons suivantes :

• Réorienter l’antenne de réception (c’est-à-

dire l’antenne de la radio ou de la télévison

qui "capte" l’interférence).

• Éloigner l’appareil de celui qui capte

l’interférence.

• Brancher l’appareil dans une autre prise

murale, afin qu’il soit branché dans une

autre prise que l’appareil qui capte

l’interférence.

Si ces solutions n’éliminent par l’interférence,

consulter le commerçant ou un technicien en

radio-télévision spécialisé. La FCC a aussi

publié un livret pratique, "Comment

identifier et résoudre les problèmes

d’interférence radio et télé". Ce livret est

distribué par le U.S Government Printing

Office (Washington, DC 20402) en anglais

seulement. Mentionner le numéro de série

004-000-00345-4 lors de la commande.

Spécifications FCC

Cet appareil ne contrevient pas aux

dispositions de la section 15 du

Règlement sur les perturbations

radioélectriques de la Federal

Communications Commission (FCC) des

États-Unis. Son fonctionnement est

assujetti aux deux conditions suivantes : 1)

cet appareil ne cause pas d’interférence

nuisible, et 2) cet appareil peut capter

toute interférence, y compris une

interférence qui pourrait causer un

fonctionnement imprévu.

En conformité avec les exigences du FCC,

des changements ou des modifications

approuvés officiellement par Thomson

Inc. peuvent retirer le droit de l’utilisateur

d’utiliser cet appareil.

Cet appareil émet et utilise une fréquence

radio (FR) et s’il n’est pas installé et utilisé

correctement, il causera de l’interférence

avec la réception radio et télévisée.

Si cet appareil cause de l’interférence avec

Voir indications sur le revers / panneau arrière du produit

AVERTISSEMENT

Afin de prévenir incendi



ou danger de choc électrique, n’exposez pas



ce produit à la pluie ou à l’humidité. 



Le point

d’exclamation à

l’intérieur du

triangle est un

avertissement

portant votre

attention à des

instructions

importantes qui

accompagnent le

produit.

Risque de choc électrique 

Ne pas ouvrir



Avertissement: Pour

diminuer le risque de

choc électrique n’enlevez

pas le couvercle (ou

panneau arrière). Il n’y a

aucune pièce que vous

pouvez réviser à

l’intérieur. Pour révision

de l’appareil, veuillez

vous référer à un agent

de service qualifié.

L’éclair et flèche

à l’intérieur d’un 

triangle est un 

avertissement 

contre un

"voltage 

dangeureux" 

à l’intérieur de 

l’appareil.

Spécifications Techniques

Produit : Radio-Réveil

Marque : RCA

Modèle : RP5400

Consommation de courant:

Source d’alimentation: 120V~60Hz

Consommation d'énergie: 4 Watts

IMPORTER

Comercializadora Thomson de México, S.A.

de C.V.

Álvaro Obregón No. 151. Piso 13.

Col. Roma. Delegación Cuauhtémoc

C.P. 06700. México, D.F.

Telefono: 52-55-11-020360

RFC: CTM-980723-KS5

Pour Votre Sécurité

Le cordon d’alimentation AC est polarisé

(une lame est plus large que l’autre) et

peut être inséré dans une prise de courant

AC d’une façon seulement. Si le cordon ne

peut pas être inséré

complètement, tournez-le

de l’autre côté et essayez

de l’insérer de cette façon.

S’il ne peut toujours pas

être inséré, contactez un

électricien qualifié pour changer la prise,

ou utilisez une prise différente. N’ignorez

pas cette étape sécuritaire.

RCA RP5400 User Manual

Top Brands

Categories

RCA RP5400 User Manual

Related Products for RCA RP5400

Related Manuals for RCA RP5400

RCA RP5400: Frequently viewed Manuals

Top Brands

Categories