Rega Planar 78 Instructions
Download Instructions of Rega Planar 78 Turntable for Free or View it Online on All-Guides.com.
1
INSTRUCTIONS
With the cartridge fitted and aligned, using the
alignment protractor supplied ensure the bias
adjustment slider is set to zero. Screw the
balance weight along its shaft until the stylus is
“floating” just 1mm clear of the record.
The recommended tracking force can now be
applied by rotating the balance weight so that it
moves towards the front of the arm. A half turn
gives 1g tracking force. Always use a force
which corresponds to the upper limit of the
cartridge makers recommended range.
Manually rotating the platter before switching
the deck on will assist in reducing motor wear
and will achieve the correct RPM.
There is no requirement for the application of a
bias force when playing 78 discs.
Mat
Platter
Power
Red (Right Channel)
White (Left Channel)
On / Off Switch
Right Channel
Left Channel
Blue or
Green:
Red or
White:
Planar 78
WARNING: ANY ATTEMPT TO ADJUST OR REPAIR THIS PRODUCT BY PERSONS OTHER THAN REGA PERSONNEL MAY INVALIDATE THE GUARANTEE.