GE CP350 Installation Instructions Manual

Download Installation instructions manual of GE CP350 Cooktop, Ventilation Hood for Free or View it Online on All-Guides.com. This version of GE CP350 Manual compatible with such list of devices, as: CP350, JP340, PP945, PP950, Profile PP932

GE CP350 Installation instructions manual - Page 1
1
GE CP350 Installation instructions manual - Page 2
2
GE CP350 Installation instructions manual - Page 3
3
GE CP350 Installation instructions manual - Page 4
4
GE CP350 Installation instructions manual - Page 5
5
GE CP350 Installation instructions manual - Page 6
6
GE CP350 Installation instructions manual - Page 7
7
GE CP350 Installation instructions manual - Page 8
8
GE CP350 Installation instructions manual - Page 9
9
GE CP350 Installation instructions manual - Page 10
10
GE CP350 Installation instructions manual - Page 11
11
GE CP350 Installation instructions manual - Page 12
12
GE CP350 Installation instructions manual - Page 13
13
GE CP350 Installation instructions manual - Page 14
14
GE CP350 Installation instructions manual - Page 15
15
GE CP350 Installation instructions manual - Page 16
16
I stallatio
I struction
30"ElectricCooktop
CP350, JP340, JP346, JP356, PP912, PP932, PP942,
PP944, PP945, PP950
Pl If you have questions, call 800.GE.CARES or visit our website at: GEApplionces.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
. IMPORTANT - savetheseinstructions
for local inspector's use.
. IMPORTANT - Observeollgoverning
codes and ordinances.
, Note to Installer- Be sure to leave these
instructions with the Consumer.
, Note to Consumer - Keep these instructions for
future reference.
, Product failure due to improper installation is not
covered under the Warranty.
A WARNING - This appliance must be
properly grounded.
. ATTENTION INSTALLER - ALL
COOKTOPS lUST BE HARD WIRED {DIRECT
WIRED} INTO AN APPROVED JUNCTION BOX. A
"PLUG AND RECEPTACLE" IS NOT PERMITTED
ON THESE PRODUCTS.
, Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
MATERIALS YOU WILL NEED
Junction Box Wire Nuts
TOOLS YOU WILL NEED
Pencil
Phillips Head
Screwdriver
Ruler or Straightedge
SaberSaw
1/8" Drill Bit & Electric or
Hand Drill
Safety Glasses
PARTS INCLUDED
4 Screws
(WBIX1137)
Foam Tape
2 Hold Down
Brackets
31-i0637-5 (07-12GE) 1