Acclaim Lighting AL-DIMMER-1 HP User Instructions
Download User instructions of Acclaim Lighting AL-DIMMER-1 HP Dimmer for Free or View it Online on All-Guides.com.
Brand: Acclaim Lighting
Category: Dimmer
Type: User instructions for Acclaim Lighting AL-DIMMER-1 HP
Pages: 4 (0.45 Mb)
1
2
3
4
DESCRIPTIONS
Congratulations with your purchase of this product.
Check for transport damage.
You should be in possession of the following items:
1 AL-DIMMER-1 HP
1 Manual
1 Screwdriver
Should you discover transport damage after unpacking the equipment,
inform the hauler immediately. Never connect a damaged device. You
may also contact your supplier.
DELIVERY PACKET
TECHNICAL SPECIFICATIONS
Operation temperature
Housing
Control Protocol
Listing
Dimensions
Weight
0 degC to +40 degC
Black plastic
DMX-512 (1990)
CE certified
115(L) x 54(W) x 23(H)mm
150g
Analog In/THRU
2-pin terminal
OPERATION GUIDE
User Instructions
Connection
Terminal
Read this manual carefully before using our AL-DIMMER-1 HP. This unit serves as a single channel dimmer. It is
designed to set the intensity for the high power R.G.B. LEDs, features the user may select the current output as
350mA, 500mA or 700mA. Its working mode is available in DMX control and Manual Dim mode, and the analog
signal is available in 0~10V and 1~10V, it's working mode and the DMX address can be set by Dip-switch.
AL-DIMMER-1 HP
-1-
IP 20
Ingress Protection Rating
Power Requirement
12~24VDC
Loading Output
2-pin terminal
DC In
4-pin terminal
Make sure the output current matches the power requirements of the LED fixtures prior to use AL-DIMMER-1 HP.
1.Output Current Option
Output Current 350mA,500mA or 700mA for option
DMX In/Out
3-pin terminal
Made in P.R.C.
GND
Data-
Data+
+12-24V
+12-24V
GND
GND
DC IN
DMX IN
DMX OUT
GND
Data -
Data+
OUTPUT
DMX Address Setting
RoHS
Addr
1
2
4
8
16
32
64
128
256
1 2
3
4
5
6
7
8 9 10
Dim
1
2
4
8
16
32
64
128
CURVE
11 12
1-10V0-10V
DMXMAN
THRU IN
GND
0-10V/1-10V
GND
0-10V/1-10V
350mA
500mA 700mA
AL-DIMMER-1 HP
AL-DIMMER-1 HP
The output current defaults as 350mA and a built-in Dipswitch allows the user to select the output current
as 350mA,500mA or 700mA.
The following contents instruct to how to make the selection for the output current.