Rimage DL5200 Reference Manual
Download Replacement procedure of Rimage Professional 5100N All in One Printer, Computer Hardware for Free or View it Online on All-Guides.com. This version of Rimage Professional 5100N Manual compatible with such list of devices, as: Professional 5100N, Professional 5300N, DL5200, DLN5200, Professional Endeavor
Brand: Rimage
Category: All in One Printer , Computer Hardware , Disc Duplicator , Printer
Type: Replacement procedure
Model: Rimage Professional 5100N , Rimage Professional 5300N , Rimage DL5200 , Rimage DLN5200 , Rimage Professional Endeavor
Pages: 1 (0.06 Mb)
1
Professional Family™ Operator
2000762_A © 2007, Rimage Corporation 1
Replace a Collator Pivot Tray on a Rimage Professional or DiscLab System
Use this procedure to replace a collator pivot tray on a Rimage 5100N™, Rimage 5300N™, DL5200™, DLN5200™, and DiscLab™.
Rimage approved parts must be used for this process. The product warranty may become void if parts not approved by Rimage are
used; equipment or parts are tampered with, misused, neglected, or modified in any respect without the written consent of Rimage.
Notes:
• The photos in this document are of any of the listed products. Your system may not look exactly like the system pictured.
• The term “Rimage System” is used throughout this document to refer to the 5100N, 5300N, DL5200, DLN5200, and DiscLab.
Before you begin
1. Stop or pause all jobs.
2. Power off the external or embedded control center.
3. Power off the Rimage System.
4. Disconnect the power cord from the power outlet.
# Required tools:
• None required
Replace the collator pivot tray
1. While slightly bending the collator pivot tray, remove the tabs from the
holes.
2. Insert one tab on the replacement collator pivot tray into the hole on the
collator.
- Important! The side with the ridge must face up.
3. While slightly bending the collator pivot tray, insert the second tab in the
second hole on the collator.
4. Repeat steps 1 – 3 for any additional collator pivot trays.
Collator
Pivot Tray
Holes
Ridge
Tab
Tab
Support information
Europe When you contact Rimage Services, please provide:
Contact Rimage Services Europe:
www.rimage.com/support.html
Email: [email protected]
Tel: +49-(0) 6074-8521-0
• Unit serial number and software version.
• Functional and technical description of the problem.
• Exact error message received.
US, Asia/Pacific, Mexico/Latin America
Contact Rimage Services:
www.rimage.com/support.html
Email: http://www.rimage.com/support_form.cfm
Tel: North America: 800-553-8312
Asia/Pacific, Mexico/ Latin America: 952-946-0004
Rimage Corporation reserves the right to make improvements to the equipment and
software described in this document at any time without any prior notice. Rimage
Corporation reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of Rimage Corporation to notify
any person or organization of such revisions or changes.