RocketFish RF-iCAP23 Quick Setup Manual

Download Quick setup manual of RocketFish RF-iCAP23 Keyboard for Free or View it Online on All-Guides.com.

Brand: RocketFish

Category: Keyboard

Type: Quick setup manual for RocketFish RF-iCAP23

Pages: 2 (0.7 Mb)

Download RocketFish RF-iCAP23 Quick setup manual

RocketFish RF-iCAP23 Quick setup manual - Page 1
1
RocketFish RF-iCAP23 Quick setup manual - Page 2
2
Keyboard
First time use
When you unpack your Capsule keyboard, the internal battery is
only partially charged. You should charge it fully before using it.
Charge the battery
Connect your Capsule keyboard to a computer or the power adapter
using the USB cable (provided) to charge the internal battery.
Note: USB cable charging voltage is 4.4v ~ 6.0v. It is recommended
that you use iPad chargers or regular computers.
Capsule Keyboard Case
RF-iCAP23
I
Quick Setup Guide
# Component
1 Earphone jack
2 Battery LED
3 Bluetooth
connection LED
4 30-pin connect slot
5 Micro USB port
6 Release button
7 Latch lock
Package contents
Capsule keyboard Ear phone jack spare cover
USB cable Quick Setup Guide
Features
82-key design, 18 hot keys for iPad 3rd Generation
Compatible with Apple iPad 2
Protective hard shell construction - Enhanced durability and stability
Smart power management - Auto turn o when closed.
Bluetooth version 3.0
Capsule parts
Setting up Capsule keyboard
1 Insert a nger into the gap,
then lift to open the top panel.
2a For typing mode, align and 2b For stand mode, pull the top panel
place the top panel on the gap. forward towards the keyboard.
3 Place the bottom edge of the iPad
into the bottom of the top panel, push
up on the latch, then move the top
edge of the iPad into the top panel.
4 Release the latch to lock the iPad
in place.
5 To change out of typing Mode,
push the release button and pull the
top panel forward towards the keyboard.
# Description
1 Home button
2 Search button
3 Photo Slide Show button
4 Virtual Keyboard button
5 Select Left button
6 Select Right button
7 Copy button
8 Cut button
9 Paste button
# Description
10 Previous track button
11 Play/Pause button
12 Next track button
13 Mute button
14 Volume down button
15 Volume up button
16 Lock button
17 Pairing button
18 International keyboard button
Description
Remove the rubber piece to connect an earphone to the iPad earphone jack.
Orange OFF: Battery full; Orange ON: Battery charging;
Orange BLINKING: Battery low
Blue FAST BLINKING (10 seconds): Re-connecting
Blue BLINKING (5 minutes): Searching for devices (pairing)
Blue ON (2 seconds): Just connected
Slide out the rubber piece to connect the 30-pin connector.
Connect to a USB power supply (e.g. wall charger or computer) with a Micro
USB cable to charge Capsule battery.
Push to release the top panel when in typing mode.
Slide latch lock upward to install iPad. Release and the iPad will lock into place.
B
B
A
A
A