Accton Technology 12se Installation Manual
Download Installation manual of Accton Technology 12se Switch for Free or View it Online on All-Guides.com. This version of Accton Technology 12se Manual compatible with such list of devices, as: 12se, 8se, EH3008C, Fast EtherHub-12se, Fast EtherHub-8se
Brand: Accton Technology
Category: Switch
Type: Installation manual
Model: Accton Technology 12se , Accton Technology 8se , Accton Technology EH3008C , Accton Technology EH3012C , Accton Technology Fast EtherHub-12se , Accton Technology Fast EtherHub-8se
Pages: 21 (1.16 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Fast EtherHub Installation Manual
9
Setting Up 100BASE-TX Stackable Hubs
1. Put the 100BASE-TX stackable hub on the flat surface.
? Ensure the power is off before stacking the hub.
2. Attach the power cord and turn on power to the hub.
3. Connect one end of the D-Sub (25 pins) stack cable to the OUT
port on the first hub and the other end to the IN port on the next
hub in the stack.
? Do not connect OUT to OUT or IN to IN port on different hubs.
4. Screw on the D-Sub (25 pins) connectors if necessary.
5. Repeat steps 2-3 until all hubs are combined together in the stack.
You should have a simple chain starting at the OUT port on the
first hub, and ending at the IN on the last hub. You can stack up
to 4 hubs in this manner. Note that a stack acts as a single repeater
set.
?The hub’s backplane ports allow cascading only up to 4 hubs.