Accton Technology 12se Installation Manual

Download Installation manual of Accton Technology 12se Switch for Free or View it Online on All-Guides.com. This version of Accton Technology 12se Manual compatible with such list of devices, as: 12se, 8se, EH3008C, EH3012C, Fast EtherHub-8se

Accton Technology 12se Installation manual - Page 1
1
Accton Technology 12se Installation manual - Page 2
2
Accton Technology 12se Installation manual - Page 3
3
Accton Technology 12se Installation manual - Page 4
4
Accton Technology 12se Installation manual - Page 5
5
Accton Technology 12se Installation manual - Page 6
6
Accton Technology 12se Installation manual - Page 7
7
Accton Technology 12se Installation manual - Page 8
8
Accton Technology 12se Installation manual - Page 9
9
Accton Technology 12se Installation manual - Page 10
10
Accton Technology 12se Installation manual - Page 11
11
Accton Technology 12se Installation manual - Page 12
12
Accton Technology 12se Installation manual - Page 13
13
Accton Technology 12se Installation manual - Page 14
14
Accton Technology 12se Installation manual - Page 15
15
Accton Technology 12se Installation manual - Page 16
16
Accton Technology 12se Installation manual - Page 17
17
Accton Technology 12se Installation manual - Page 18
18
Accton Technology 12se Installation manual - Page 19
19
Accton Technology 12se Installation manual - Page 20
20
Accton Technology 12se Installation manual - Page 21
21
Fast EtherHub Installation Manual
11
Uplink Multiple Hubs
If you want to connect more than 8/12 ports, you can use the uplink
port to connect to another hub. In compliance with the IEEE802.3u
Class II specification, two repeaters can be cascaded using 5 meters of
cable in a single collision domain.
1. Connect a Category 5 UTP cable to the UPLINK port (Port 8/12)
on the first hub.
2. Connect the other end of the UTP cable to any of Ports 1 - 8/12 on
the second hub (i.e., do not connect it to the UPLINK port on the
second hub).
? You do not need crossover cable if you use the uplink port.
? Do not connect the uplink port (Port 8/12) on first hub to the
uplink port (Port 8/12) on the second hub.