• Home
• Brands
• Accton Technology Manuals
• Accton Technology 12se
• Accton Technology 12se Installation Manual

Accton Technology 12se Installation Manual

Download Installation manual of Accton Technology 12se Switch for Free or View it Online on All-Guides.com. This version of Accton Technology 12se Manual compatible with such list of devices, as: 12se, 8se, EH3008C, EH3012C, Fast EtherHub-12se

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

Fast EtherHub Installation Manual

16

EMI Warning

FCC Class A Certification

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Warning: This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause interference to radio communications.

It has been tested and found to comply with the limits for a Class A

digital device pursuant to Subpart B of Part 15 of FCC Rules, which

are designed to provide reasonable protection against such interference

when operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which

case the user, at his own expense, will be required to take whatever

measures are required to correct the interference.

You may use 100Ω Category 5 unshielded twisted-pair (UTP) or 100Ω

Category 5 shielded twisted-pair (STP) cable for RJ-45 connections.

Warnings

1. Wear an anti-static wrist strap or take other suitable measures to prevent

electrostatic discharge whenever handling this equipment.

2. When connecting this hub to a power outlet, connect the field ground lead on the tri-

pole power plug to a valid earth ground line to prevent electrical hazards.

3. The connectors are not for telephone system use.

Note:

In order to maintain compliance with the limits of a Class A digital device,

Accton requires that you use a quality interface cable when connecting to this

device. Changes or modifications not expressly approved by Accton could

void the user’s authority to operate this equipment. Suggested cable type is:

Twisted-pair for RJ-45 connections: 100BASE-TX