Accton Technology ES3628EA Installation Manual
Download Installation manual of Accton Technology ES3628EA Switch for Free or View it Online on All-Guides.com.
Brand: Accton Technology
Category: Switch
Type: Installation manual for Accton Technology ES3628EA
Pages: 62 (1.58 Mb)
3-7
Connecting to a Power Source
3
Connecting to a Power Source
To connect a device to a power source:
1. Insert the power cable plug directly into the receptacle located at the back of
the device.
Figure 3-6 Power Receptacle
2. Plug the other end of the cable into a grounded, 3-pin socket.
Note: For International use, you may need to change the AC line cord. You must
use a line cord set that has been approved for the receptacle type in your
country.
3. Check the front-panel LEDs as the device is powered on to be sure the Power
LED is lit. If not, check that the power cable is correctly plugged in.
4. If you have purchased a Redundant Power Supply, connect it to the switch and
to an AC power source now, following the instructions included with the
package.