• Home
• Brands
• Ryobi Manuals
• Ryobi OP241
• Ryobi OP241A Manual

Ryobi OP241A Manual

Download Operation manual of Ryobi OP241 Battery Charger for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

SAFETY RULES

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause sparks, burns, or a

fire.

 Always remove battery pack from your tool when you

are assembling parts, making adjustments, cleaning,

or when not in use. Removing battery pack will prevent

accidental starting that could cause serious personal injury.

 Always remove battery pack before storing the device.

 When battery becomes fully charged, unplug the

charger from the power supply and remove the battery

pack from the charger.

 Always wear eye protection with side shields marked

to comply with ANSI Z87.1, along with hearing protec-

tion. Failure to do so could result in objects being thrown

into your eyes and other possible serious injuries.

Keep battery pack dry, clean, and free from oil and

grease. Always use a clean cloth when cleaning. Never

use brake fluids, gasoline, petroleum-based products, or

any solvents to clean battery pack.

 Save these instructions. Refer to them frequently and use

them to instruct others who may use this tool. If you loan

someone this tool, loan them these instructions also.

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure

to follow all instructions listed below, may result in electric

shock, fire and/or serious personal injury.

Battery tools do not have to be plugged into an elec-

trical outlet; therefore, they are always in operating

condition. Be aware of possible hazards when not us-

ing your battery tool or when changing accessories.

Following this rule will reduce the risk of electric shock,

fire, or serious personal injury.

Do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and possibly

injury.

 Do not crush, drop or damage battery pack. Do not

use a battery pack or charger that has been dropped

or received a sharp blow. A damaged battery is subject

to explosion. Properly dispose of a dropped or damaged

battery immediately.

Batteries can explode in the presence of a source of

ignition, such as a pilot light. To reduce the risk of seri-

ous personal injury, never use any cordless product in the

presence of open flame. An exploded battery can propel

debris and chemicals. If exposed, flush with water imme-

diately.

Do not charge battery tool in a damp or wet location.

Following this rule will reduce the risk of electric shock.

For use only with 24 V Li-Ion chargers, see tool/

appliance/battery pack/charger correlation supplement

988000-446.

For best results, your battery tool should be charged

in a location where the temperature is more than 50°F

but less than 100°F. To reduce the risk of serious personal

injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, bat-

tery leakage may occur. If liquid comes in contact with

your skin, wash immediately with soap and water. If

liquid gets into your eyes, flush them with clean water

for at least 10 minutes, then seek immediate medical

attention. Following this rule will reduce the risk of serious

personal injury.

 When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys, nails,

24 VOLT LITHIUM-ION

BATTERY PACK

OP241

Always mention the above model numbers when

communicating with us regarding battery pack.

Use battery pack for Ryobi 24 V cordless products only. Refer

to the Operator’s Manual provided with product.

OPERATION

BATTERY PROTECTION FEATURES

Ryobi 24 V lithium-ion battery packs are designed with features

that protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and

resume operation. If the tool still does not work, the battery

needs to be recharged.

BATTERY FUEL GAUGE

See Figure 1

To display the amount of charge left in the battery, press the

charge level indicator button:

LED FUNCTIONS

CHARGE STATUS

0 - 10%

10 - 25%

25 - 50%

50 - 75%

75 - 100%

CHARGING THE BATTERY PACK

See Figure 1.

Battery packs are shipped in a low charge condition to

prevent possible problems. Therefore, you should charge

prior to first use.

If the charger does not charge the battery pack under normal

circumstances, return both the battery pack and charger to

your nearest Authorized Service Center for electrical check.