• Home
• Brands
• APW Wyott Manuals
• APW Wyott HDD-1
• APW Wyott HDD-1 Specifications

APW Wyott HDD-1 Specifications

Download Specifications of APW Wyott HDD-1 Warming Drawer for Free or View it Online on All-Guides.com. This version of APW Wyott HDD-1 Manual compatible with such list of devices, as: HDD-2, HDD-3, HDDS-1, HDDS-2, HDDS-3

1

2

PRODUCT: QUANTITY: ITEM #:

Standard Models:  HDD-1  HDD-2  HDD-3 Slimline Models:  HDDS-1  HDDS-2  HDDS-3

Designed Smart

Built Solid

APW Wyott Design Features

Standard & Slimline

Countertop Holding Drawers

APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226

(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com · [email protected]

Rev. 6/9/2005

MODEL HDD-1 COUNTERTOP HOLDING DRAWER

See reverse side for product specifications.

Options

• Perforated well-pan bottom

• 2" swivel casters

• 6" Stainless Steel Legs

• Color Drawer Fronts (call factory for color availability and cost)

Built to Last

• Frame, interior and exterior construction is made with stainless steel.

• Drawers are constructed with reinforced 14 gauge stainless steel

drawer slides that ride on two reinforced 16 gauge stainless steel

slide brackets. (Will not bend or warp drawer tracking system.)

• Each Drawer Slide rides on 4 self lubricated, stainless steel rollers

that are secured to the interior walls with a reinforced bolt system.

• APW Wyott Drawer Slides feature a unique "jam-free" side roller,

a design that facilitates the smoothest closing action in the

industry from any angle in which the operator pushes the drawer.

• Drawers have built-on horizontal stainless steel handles.

Reliability backed by APW Wyott’s Warranty

• All APW Wyott holding drawers are backed by a 1-year parts

and labor warranty, including on-site service calls within 50

miles of authorized service technicians.

• Certified by the following agencies:

Developed for High Performance!

• APW Wyott Holding Drawers are designed to hold everything

from crispy foods to moist foods at required NSF temperatures.

• Heating system is designed to provide fast start-ups and heat

recoveries when drawers are open and closed.

• Thermostatic controls in each drawer precisely regulate

temperatures between 110 degrees and 200 degress.

• Perimeter heating elements distribute heat evenly through the

drawer area, promoting consistent food temperatures throughout

the food pan while avoiding scalding due to warmer "hot spots".

• The only Holding Drawer built with "extra deep" holding pan

(6 ¼" deep). Deeper pan holds 6" deep food pans without

resting on the bottom of the holding area. This avoids scalding

on the bottom of food pans.

• Deep Holding Pan is perfect for using with ¼" of water at the

bottom, promoting a more effective heat transfer and higher

humidity level.

• Vent Slides in each Drawer Front allow operator to control the

amount of humidity in each compartment.

Energy Efficient!

• The complete Drawer Compartment is protected with 1-inch

fiberglass insulation, including the Drawer Front Panels.

Insulation focuses heat into the food and keeps exterior panels

"cool to the touch."

Easy to Maintain and Service!

• Holding Pan lifts directly out of Drawer, allowing for quick

cleaning and maintenance.

• Heavy-duty stainless steel construction for the frame,

exterior and interior.

• Fully insulated compartments with 1" thick fiberglass sheets

on top, sides and drawer fronts.

• 14 gauge stainless steel drawer slides with reinforced 16

gauge Slide Brackets

• Side "Jam-free" Roller design on the Drawer slide

• Each drawer individually controlled by a protected

thermostat, indicator lamp and rolling read-out thermometer.

• Temperature range of 100° - 200°F (38°C - 93°C).

• Adjustable Vent Controls on each drawer.

• Each drawer has removable 12"x20"x6 1/4" deep stainless

steel liner pan.

• Built-on Stainless steel handles

The Holding Drawer Warmers shall be a APW Wyott Model ...., as

manufactured by the APW Wyott, Dallas, TX, U.S.A. The unit shall

have ....drawer(s) and be rated at ....watts, ....amps. Freestanding

model shall be equipped with a cord and plug. The Drawer Warmer

shall have a stainless steel exterior, interior, drawer slides, and

assembly. Drawer rollers shall be self lubricated, stainless steel. The

drawer slide shall have the "jam-free" side roller system. The unit

shall be insulated in the top, sides and drawer fronts of each com-

partment and have individual power switch, thermostat and temper-

ature monitor for each drawer.

Consultant Specifications