APW Wyott HDDS-1B Specifications

Download Specifications of APW Wyott HDDS-1B Warming Drawer for Free or View it Online on All-Guides.com. This version of APW Wyott HDDS-1B Manual compatible with such list of devices, as: HDDS-1B, HDDS-2B, HDDS-3B, HDD-2B, HDD-3B

APW Wyott HDDS-1B Specifications - Page 1
1
APW Wyott HDDS-1B Specifications - Page 2
2
Developed for High Performance!
The APW Wyott Built-In Holding Drawers are designed to hold
all "potentially hazardous foods" at required NSF temperatures.
Heating system is designed to provide fast start-ups, quickly
heating to temperatures up to 200 degrees.
Thermometer in control panel accurately reflects temperature
in drawer area. Operators can achieve the optimal holding
condition that keeps food safe but does not over-heat food
product.
Maximum Versatility!
Perimeter heating elements distribute heat evenly through
the drawer area, allowing for maximum control of your
temperature needs.
Handles Crispy or Moist food equally well by using adjustable
louvers on each drawer. This feature retains the ideal moisture
level in the compartment.
Drawers can handle a variety of Pan insert sizes or be utilized
directly without inserts, utilizing 12 x 20 x 6 1/2” pan liner provided.
6 1/22
Energy Efficient!
Top and side panels are built with 1-inch fiberglass insulation pads.
Insulation keeps heat in and keeps exterior panels "cool to
the touch."
Easy to Maintain and Service!
Removable pan allows for quick clean up of drawer area.
• Front mounted control panel is easy to access and service.
PRODUCT: QUANTITY: ITEM #:
Models: HDDS-1B HDDS-2B HDDS-3B HDDS-1B HDDS-2B HDDS-3B
Designed Smart
Built Solid
APW Wyott Design Features
Standard & Slimline
Built-In Holding Drawers
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com · [email protected]
Rev. 5/22/2005
Built-In Holding Drawer
Built to Last
Exterior is built with heavy-duty stainless steel to protect
against kitchen wear and rust.
Drawers are constructed with reinforced 14 gauge stainless
steel drawer slides. Will not bend or warp drawer tracking
system.
85% increase in drawer bracket support. Drawer Roller
brackets re-inforced by two 16 gauge stainless steel plates.
Drawers have built-on horizontal stainless steel handles.
Reliability backed by APW Wyott’s Warranty
All APW Wyott holding drawers are backed by a 1-year parts
and labor warranty, including on-site service calls within 50
miles of authorized service technicians.
Certified by the following agencies:
• Heavy-duty stainless steel with 1” fiberglass insulation.
14 gauge stainless steel drawer slides.
Each drawer individually controlled by a protected
thermostat, indicatior lamp and rolling read-out thermometer.
Temperature range of 100° - 200°F (38°C - 93°C).
Adjustable louvers on each drawer.
Each drawer has removable 12”x20”x6 1/2” deep stainless
steel liner pan.
Built-Ins have a Terminal Block for quick installation.
See reverse side for product specifications.
Options
Perforated well-pan bottom (14900)
Full and fractional size steamtable pans up to 6” deep