Panasonic AW-EX500N User Manual
Download Operating instructions manual of Panasonic AWEX500N - SIGNAL CONVERTER Accessory for Free or View it Online on All-Guides.com.
Brand: Panasonic
Category: Accessory
Type: Operating instructions manual for Panasonic AWEX500N - SIGNAL CONVERTER
Pages: 20 (0.29 Mb)
Download Panasonic AWEX500N - SIGNAL CONVERTER Operating instructions manual
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
=
Function setting switch 2
This is used to select the operations of the AW-EX500.
Before changing a setting, the power must be turned off.
The setting items are shown below.
1: Output signal setting 1 [D-SUB OUT SEL1]
<YC/RGB, YR-YB-Y>
(Factory setting: RGB, YR-YB-Y)
2: Output signal setting 2 [D-SUB OUT SEL2]
<RGB/YR-YB-Y> (Factory setting: YR-YB-Y)
These are used to select the signals to be output to pins
#3, #4 and #5 of analog video output connector 1.
The switch combinations are shown below.
- 11 -
3: Analog RGB output SYNC addition setting
<SYNC ON/SYNC OFF>
(Factory setting: SYNC OFF)
This is used to set whether to add the SYNC signal to
the RGB signals when RGB has been selected as the
analog video output setting.
At SYNC ON, the SYNC signal is added to the R, G
and B signals.
4: Not used <ON/OFF>
(Factory setting: OFF)
Keep this at the factory setting.
>
Additional card slot
Remove the cover, and connect the AW-EX100 additional
card box.
1
2
3
4
O
N
D-SUB OUT SEL1 D-SUB OUT SEL2
Output signal
RGB, YR-YB-Y YR-YB-Y Component
RGB, YR-YB-Y RGB RGB
Y/C YR-YB-Y Y/C
Y/C RGB Y/C
ON OFF SW NO
—— —— NOT USE 4
SYNC ON SYNC OFF RGB OUT SYNC 3
RGB YR-YB-Y D-SUB OUT SEL 2 2
YC RGB, YR-YB-Y D-SUB OUT SEL 1 1