Accusplit AH120M9 Operating Instructions

Download Operating instructions of Accusplit Healthengine AH120M9 Pedometer for Free or View it Online on All-Guides.com.

Brand: Accusplit

Category: Pedometer

Type: Operating instructions for Accusplit Healthengine AH120M9

Pages: 3 (0.35 Mb)

Download Accusplit Healthengine AH120M9 Operating instructions

Accusplit Healthengine AH120M9 Operating instructions - Page 1
1
Accusplit Healthengine AH120M9 Operating instructions - Page 2
2
Accusplit Healthengine AH120M9 Operating instructions - Page 3
3
2 3
4
5
6 7
Operating Instructions
ACCUSPLIT
AH120M9 PEDOMETER
DISPLAYS
CURRENT DAY
Display
days
1
7644
MEMORY
display area (flashes when in memory mode)
MEMORY
Display
8922
16:30
The pedometer has two display modes: CURRENT DAY and
MEMORY.
1. CURRENT DAY display: Memory display area in
lower right of screen is blank and clock is present
in lower left corner.
2. MEMORY display: Memory display area in lower
right of screen shows which day’s results you are
viewing. To enter MEMORY display, press the gray
“M” button.
Return to CURRENT DAY display by repeatedly pressing
the gray “M” button until the memory display area is
blank, and clock returns.
Make sure you are in CURRENT DAY display when setting up
your pedometer and checking todays steps.
2
SETTING UP YOUR PEDOMETER
ACCUSPLIT products use a common setting procedure,
S1-S2-S3-S4.
Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode
SETTING THE CLOCK
The clock must be set in order for the memory’s automatic
rollover function to work correctly.
1. Press and hold the gray S1 button for 2 seconds. The
HOUR display will start to blink, showing that you’ve
entered SET mode.
8922
16:30
2. Press the gray S3 button to increase the HOUR display.
Hold the button down to change hours quickly.
PM hours are displayed in military time (1:00 PM is
13:00, 2:00 PM is 14:00, etc.).
3. Press the yellow S2 button to switch from the HOUR
display to the MINUTE display. The MINUTE display
will start to blink.
4. Press the gray S3 button to increase the MINUTE
display. Hold the button down to change minutes
quickly.
5. Press and hold the yellow S4 button for 2 seconds to
exit SET mode and return to STEP mode. The display
will stop flashing.
990-003B
ACCUSPLIT, Inc.
2290A Ringwood Ave., San Jose, CA 95131
800-965-2008 • 925-226-0888 • FAX 925-463-0147
www.ACCUSPLIT.com/support • support@ACCUSPLIT.com
Eat Right! Walk More! Live Well!
The ACCUSPLIT Lifestyle
How to Open your pedometer.
See diagrams at right.
ACCU
SPLIT
healtheng
in
e
125379
15:15 78
5
MODE
MEMOR
Y
RESE
T