• Home
• Brands
• arcelik Manuals
• arcelik 8123 H
• arcelik 8123 H User's Manual

Arcelik 8123 H User's Manual

Download Operation & user’s manual of arcelik 8123 H Washer for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

29

EN

7 Troubleshooting

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to a supply problem

(line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel

button for 3 seconds to reset the machine to factory settings. (See "Canceling the

programme")

Water in the machine.

• Some water might have remained in the product due to the quality control

processes in the production. >>> This is not a failure; water is not harmful to the

machine.

There is water leaking from the bottom of the washing machine.

• Likely problems with hoses or the pump filter. >>> Be sure the seals of the water

inlet hoses are securely fitted. Attach the hose to the tap tightly.

• Pump filter might not be closed fully. >>> Make sure that the pump filter is

completely closed.

Machine does not fill with water.

• Tap is turned off. >>> Open the inlet water taps fully.

• Water inlet hose is bent. >>> Flatten the water inlet hose.

• Water inlet filter is clogged. >>> Clean the water inlet filter.

• The loading door is ajar. >>> Close the Loading Door.

Machine does not drain water.

• Water drain hose might be clogged or twisted. >>> Clean or flatten the hose.

• Pump filter is clogged. >>> Clean the pump filter.

Machine vibrates or makes noise.

• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

• A hard substance might have entered into the pump filter. >>> Clean the pump

filter.

• Transportation safety bolts are not removed. >>> Remove the transportation

safety bolts.

• Laundry quantity in the machine might be too little. >>> Add more laundry to the

machine.

• Machine might be overloaded with laundry. >>> Take out some of the laundry

from the machine or distribute the load by hand to balance it homogenously in the

machine.

• Machine might be leaning on a rigid item. >>> Make sure that the machine is not

leaning on anything.

Machine stopped shortly after the programme started.

• Machine might have stopped temporarily due to low voltage. >>> It will resume

running when the voltage restores to the normal level.

Machine directly discharges the water it takes in.

• Draining hose might not be at adequate height. >>> Connect the water draining

hose as described in the operation manual.

No water can be seen in the machine during washing.

C

The water level is not visible from outside of the washing machine. This is not a

failure.