SMEG PVA750A Manual

Download Manual  of Smeg PVA750A Burner for Free or View it Online on All-Guides.com.

Brand: Smeg

Category: Burner

Type: Manual 

Model: Smeg PVA750A , Smeg PVA750A-1 , Smeg PVS750A

Pages: 20 (2.43 Mb)

Download Smeg PVA750A Manual 

Smeg PVA750A Manual  - Page 1
1
Smeg PVA750A Manual  - Page 2
2
Smeg PVA750A Manual  - Page 3
3
Smeg PVA750A Manual  - Page 4
4
Smeg PVA750A Manual  - Page 5
5
Smeg PVA750A Manual  - Page 6
6
Smeg PVA750A Manual  - Page 7
7
Smeg PVA750A Manual  - Page 8
8
Smeg PVA750A Manual  - Page 9
9
Smeg PVA750A Manual  - Page 10
10
Smeg PVA750A Manual  - Page 11
11
Smeg PVA750A Manual  - Page 12
12
Smeg PVA750A Manual  - Page 13
13
Smeg PVA750A Manual  - Page 14
14
Smeg PVA750A Manual  - Page 15
15
Smeg PVA750A Manual  - Page 16
16
Smeg PVA750A Manual  - Page 17
17
Smeg PVA750A Manual  - Page 18
18
Smeg PVA750A Manual  - Page 19
19
Smeg PVA750A Manual  - Page 20
20
Instructions for the Installer
8
4.2 Fitting the adhesive foam rubber strip
Fit the adhesive foam rubber strip
(supplied with the hob) around the
outside edge of its surround.
It will act as a cushion between
the surface of the surround and
that of the cabinet. The diagram
on the right shows the correct
position for the foam rubber strip.
Take great care when fitting it to
ensure that it does not project
beyond the outside edge of the
frame.
4.3 Fitting the fixing clips
Fit the fixing clips in all the points
marked with an arrow. The clips
fix the hob an ensure that it is
centred correctly.
To fit the clips to the hob, simply
press them gently horizontally into
the groove provided (fig. A).
Then turn them upwards to fix
them permanently in place (fig. B).
4.4 Fitting the hob into the hole in the work-top
Take special care when fitting the hob into the work-top. If the procedures are not
carried out correctly, exactly as described, the hob may be damaged.
Before fitting the hob, remove
the pan stands (if fitted) and the
burners from the hob.
When fitting the hob, first rest the
surround entirely on the back
edge of the hole in the work-top.
Do not apply leverage to the
surround; since this part is very
delicate there is a risk of
damaging it.
Then lower the front of the hob
until the appliance is completely in
place.