SMEG SF341GVX Manual

Download Manual  of Smeg SF341GVX Clock for Free or View it Online on All-Guides.com.

Brand: Smeg

Category: Clock

Type: Manual  for Smeg SF341GVX

Pages: 28 (0.98 Mb)

Download Smeg SF341GVX Manual 

Smeg SF341GVX Manual  - Page 1
1
Smeg SF341GVX Manual  - Page 2
2
Smeg SF341GVX Manual  - Page 3
3
Smeg SF341GVX Manual  - Page 4
4
Smeg SF341GVX Manual  - Page 5
5
Smeg SF341GVX Manual  - Page 6
6
Smeg SF341GVX Manual  - Page 7
7
Smeg SF341GVX Manual  - Page 8
8
Smeg SF341GVX Manual  - Page 9
9
Smeg SF341GVX Manual  - Page 10
10
Smeg SF341GVX Manual  - Page 11
11
Smeg SF341GVX Manual  - Page 12
12
Smeg SF341GVX Manual  - Page 13
13
Smeg SF341GVX Manual  - Page 14
14
Smeg SF341GVX Manual  - Page 15
15
Smeg SF341GVX Manual  - Page 16
16
Smeg SF341GVX Manual  - Page 17
17
Smeg SF341GVX Manual  - Page 18
18
Smeg SF341GVX Manual  - Page 19
19
Smeg SF341GVX Manual  - Page 20
20
Smeg SF341GVX Manual  - Page 21
21
Smeg SF341GVX Manual  - Page 22
22
Smeg SF341GVX Manual  - Page 23
23
Smeg SF341GVX Manual  - Page 24
24
Smeg SF341GVX Manual  - Page 25
25
Smeg SF341GVX Manual  - Page 26
26
Smeg SF341GVX Manual  - Page 27
27
Smeg SF341GVX Manual  - Page 28
28
Installation
51
EN
5 Installation
5.1 Gas connection
General information
Connection to the gas supply network can
be made using a rigid copper hose or a
continuous wall or flexible steel hose in
compliance with the provisions established
by the applicable standard. The appliance
is preset for natural gas G20 (2H) at a
pressure of 20 mbar. For supplying it with
other types of gas, see chapter "5.2
Adaptation to different types of gas". The
gas inlet connection is threaded ½”
external gas (ISO 228-1).
Connection with a flexible steel hose
Make the connection to the gas mains
using a continuous wall flexible steel hose
whose specifications comply with the
current regulations.
Carefully screw the connector 3 to the gas
connector 1 of the appliance, placing the
seal 2 between them.
Connection with a rigid copper hose
The connection to the gas supply network
must be made in such a way that it does not
cause stresses of any type on the
appliance.
Carefully screw the adapter unit 3 with
double cone to the gas connector 1 of the
appliance, placing the supplied seal 2
between them.
Connection to LPG
Use a pressure regulator and make the
connection on the gas cylinder following
the guidelines set out in the regulations in
force.
Gas leak
Danger of explosion
• After carrying out any operation, check
that the tightening torque of gas
connections is between 15 Nm and 20
Nm.
• If required, use a pressure regulator that
complies with current regulations.
• At the end of the installation, check for
any leaks with a soapy solution, never
with a flame.
• Installation with a flexible hose must be
carried out so that the length of the
piping does not exceed 2 metres when
fully extended.
• The hoses should not come into contact
with moving parts and should not be
crushed in any way.