SMEG CP60X8 Manual
Download Manual of Smeg CP60X8 Computer Hardware for Free or View it Online on All-Guides.com.
Brand: Smeg
Category: Computer Hardware
Type: Manual
Model: Smeg CP60X8 , Smeg CP60X9 , Smeg GP61X8
Pages: 36 (4.32 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
48
Instructions for the user
5.2 Using the rack or tray
The racks and trays are equipped with a
mechanical safety lock which prevents
them from being taken out accidentally. To
insert the rack or tray correctly, check that
the lock is facing downwards (as shown in
the figure at the side).
To remove the rack or tray, lift the front
slightly.
The mechanical lock (or the extension
piece where present) must always face the
back of the oven.
Gently insert racks and trays into the oven until they come to a stop.
In models with runners, clean the trays before using them for the first time. Cleaning will remove any
manufacturing residues, which may otherwise scratch the sides of the oven cavity when trays are being
inserted.
5.3 Using the support rack
The support rack is inserted into the tray (as shown in the figure). Using
this, foods can be cooked and the fat can be collected separately from the
food which is being cooked.
5.4 Using the rotisserie rod (on some models only)
When cooking with the rotisserie, position
the frame on the second runner (see 7.2
Oven runners). Once the frame is inserted,
the shaped part must sit facing outwards
(as shown in the figure).
Then prepare the rotisserie rod with the
food, using the clip forks provided.
So that you can handle the rod with the
food on it readily, screw on the handle
provided.
Having prepared the rotisserie rod with the
food, position it on the guide frame as
shown in the figure.
Insert the rod into the hole (detail B) so that
it connects with the rotisserie motor.
Make sure that the pin is placed correctly
on the guide frame (detail A).