SMEG SSA60MX8 Manual

Download Manual  of Smeg SSA60MX8 Computer Hardware for Free or View it Online on All-Guides.com.

Brand: Smeg

Category: Computer Hardware

Type: Manual  for Smeg SSA60MX8

Pages: 36 (4.57 Mb)

Download Smeg SSA60MX8 Manual 

Smeg SSA60MX8 Manual  - Page 1
1
Smeg SSA60MX8 Manual  - Page 2
2
Smeg SSA60MX8 Manual  - Page 3
3
Smeg SSA60MX8 Manual  - Page 4
4
Smeg SSA60MX8 Manual  - Page 5
5
Smeg SSA60MX8 Manual  - Page 6
6
Smeg SSA60MX8 Manual  - Page 7
7
Smeg SSA60MX8 Manual  - Page 8
8
Smeg SSA60MX8 Manual  - Page 9
9
Smeg SSA60MX8 Manual  - Page 10
10
Smeg SSA60MX8 Manual  - Page 11
11
Smeg SSA60MX8 Manual  - Page 12
12
Smeg SSA60MX8 Manual  - Page 13
13
Smeg SSA60MX8 Manual  - Page 14
14
Smeg SSA60MX8 Manual  - Page 15
15
Smeg SSA60MX8 Manual  - Page 16
16
Smeg SSA60MX8 Manual  - Page 17
17
Smeg SSA60MX8 Manual  - Page 18
18
Smeg SSA60MX8 Manual  - Page 19
19
Smeg SSA60MX8 Manual  - Page 20
20
Smeg SSA60MX8 Manual  - Page 21
21
Smeg SSA60MX8 Manual  - Page 22
22
Smeg SSA60MX8 Manual  - Page 23
23
Smeg SSA60MX8 Manual  - Page 24
24
Smeg SSA60MX8 Manual  - Page 25
25
Smeg SSA60MX8 Manual  - Page 26
26
Smeg SSA60MX8 Manual  - Page 27
27
Smeg SSA60MX8 Manual  - Page 28
28
Smeg SSA60MX8 Manual  - Page 29
29
Smeg SSA60MX8 Manual  - Page 30
30
Smeg SSA60MX8 Manual  - Page 31
31
Smeg SSA60MX8 Manual  - Page 32
32
Smeg SSA60MX8 Manual  - Page 33
33
Smeg SSA60MX8 Manual  - Page 34
34
Smeg SSA60MX8 Manual  - Page 35
35
Smeg SSA60MX8 Manual  - Page 36
36
32
Instructions for the installer
11.3 Gas connection
At the end of the installation, check for any leaks with a soapy solution, never with a flame.
The tightening torque between connections that incorporate a gasket must be between 10 and 15 Nm.
After carrying out any operation on the appliance, check the gas connections are properly tightened.
If the appliance is fuelled by LPG gas, use a standards-compliant pressure
regulator and connect to the gas cylinder in accordance with the regulations in
force.
Make sure that the feed pressure complies with the values indicated in the table
“12.3 Burner and nozzle characteristics table”.
11.3.1Connection with a rubber hose
WARNING: The following instructions are valid solely for Class 1 installations. See fig. C in
chapter “11.1 Installing in kitchen units”.
Connection using a rubber hose complying with the current regulations is only permitted if the hose can
be inspected along its entire length.
The inside diameter of the hose must be 8 mm for LPG GAS and 13 mm for NATURAL GAS and CITY
GAS.
Installation with a standards-compliant rubber hose must be carried out so that the
length of the piping does not exceed 1.5 metres; make sure that the hose does not
come into contact with moving parts and that it is not crushed in any way.
Verify that all the following conditions are met:
the hose is fixed to the hose connection with safety clamps;
no part of the hose is in contact with hot walls (max. 50°C);
the hose is not under traction or tension and has no kinks or twists;
the hose is not in contact with sharp objects or sharp corners;
if the hose is not perfectly airtight and leaks gas, do not try to repair it: replace
it with a new hose;
verify that the hose is not past its expiry date (serigraphed on the hose itself).