Smeg AP64S3 Instructions For Use Manual

Download User manual manual of OPTICOM VDC10X - DATA 2 Cooktop, Hob for Free or View it Online on All-Guides.com. This version of OPTICOM VDC10X - DATA 2 Manual compatible with such list of devices, as: PS60GH, S93ASX3, SE64EB3, SE64STF3, SR804COGH

OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 1
1
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 2
2
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 3
3
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 4
4
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 5
5
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 6
6
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 7
7
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 8
8
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 9
9
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 10
10
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 11
11
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 12
12
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 13
13
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 14
14
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 15
15
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 16
16
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 17
17
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 18
18
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 19
19
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 20
20
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 21
21
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 22
22
OPTICOM VDC10X -  DATA 2 User	manual	manual - Page 23
23
Instructions for the installer
36
6 GAS CONNECTION
Connection to the gas mains may be made with a rigid copper pipe or
with a flexible pipe and conforming to the provisions defined by
standard regulations in force.
To facilitate connection, fitting A on the rear of the appliance may be
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting A
to the desired position, and retighten hexagon nut B (tightness is
ensured by a biconical brass ring). Use a soapy solution to check for
proper tightness. Never use a free flame. The hob has been inspected
for G20 (2H) natural gas at a pressure of 20 mbar. For use with other
types of gases, see Section “7. ADAPTATION TO DIFFERENT TYPES
OF GAS”. The gas intake fitting is ½” gas external threaded (ISO 228-
1).
Connection with rigid copper pipe: the
connection to the gas mains must not
provoke stress of any kind on the hob.
Connection may be made by using biconical
adapter D with insertion of gasket C
(supplied).
Connection with flexible pipe: use only
flexible pipes conforming to standard
regulations in force, inserting gasket C
(supplied) between fitting A and flexible pipe
E.
The flexible pipe has to be installed so that pipe length does not exceed
1.5 meters of maximum extension. Make sure that the pipes do not
touch any moving parts or become damaged.