Smeg AS28I96L Instructions For Installation And Use Manual

Download Instructions for installation and use manual of Smeg AS28I96L Cooktop for Free or View it Online on All-Guides.com. This version of Smeg AS28I96L Manual compatible with such list of devices, as: PLAL18D/B, PLAL24D1, PLAL24DNL, PLAL24S1B, PLAL24S1E

Smeg AS28I96L Instructions for installation and use manual - Page 1
1
Smeg AS28I96L Instructions for installation and use manual - Page 2
2
Smeg AS28I96L Instructions for installation and use manual - Page 3
3
Smeg AS28I96L Instructions for installation and use manual - Page 4
4
Smeg AS28I96L Instructions for installation and use manual - Page 5
5
Smeg AS28I96L Instructions for installation and use manual - Page 6
6
Smeg AS28I96L Instructions for installation and use manual - Page 7
7
Smeg AS28I96L Instructions for installation and use manual - Page 8
8
Smeg AS28I96L Instructions for installation and use manual - Page 9
9
Smeg AS28I96L Instructions for installation and use manual - Page 10
10
Smeg AS28I96L Instructions for installation and use manual - Page 11
11
Smeg AS28I96L Instructions for installation and use manual - Page 12
12
Smeg AS28I96L Instructions for installation and use manual - Page 13
13
Smeg AS28I96L Instructions for installation and use manual - Page 14
14
Instructions for the installer
28
4. FINAL OPERATIONS
Having carried out the above adjustments, reassemble the appliance
following, backwards, the instructions in paragraph “3.1 Removing the
top”.
After adjustment to a different kind of gas from the one for which the
cooker has been tested, replace the plate inside the heating
compartment with one corresponding to the new kind of gas. This plate
can be obtained from your nearest Authorised Assistance Centre.
4.1 Adjustment of minimum for natural gas
Light the burner and take it to the minimum.
Remove the gas tap knob and turn the
adjustment screw inside or at the side of the tap
shaft (depending on the model) until there is a
regular minimum flame. Replace the knob and
check burner flame stability: (rapidly turning the
knob from maximum to minimum position, the
flame should not go out). Repeat the operation on
all the gas taps.
4.2 Regulation of minimum for LPG
To regulate the minimum for LPG, completely tighten (clockwise) the
screw inside or next to the gas tap pin (depending on the model).
The diameters of the by-passes for each burner are given in table “3.2
Regulation for LPG”.
4.3 Arrangement of burners on cooking hob
BURNERS
1 Auxiliary
2 Semi rapid
3 Rapid
4 Ultrarapid
4.4 Lubrication of gas taps
With time it may happen that the gas taps get blocked and hard to turn.
Clean them inside and re-grease them. This operation must be done
by a specialised technician.