Smeg AS28I96L Instructions For Installation And Use Manual

Download Instructions for installation and use manual of Smeg AS28I96L Cooktop for Free or View it Online on All-Guides.com. This version of Smeg AS28I96L Manual compatible with such list of devices, as: AS28I96L, PLAL18DNL, PLAL24D/E, PLAL24D1N, PVD96

Smeg AS28I96L Instructions for installation and use manual - Page 1
1
Smeg AS28I96L Instructions for installation and use manual - Page 2
2
Smeg AS28I96L Instructions for installation and use manual - Page 3
3
Smeg AS28I96L Instructions for installation and use manual - Page 4
4
Smeg AS28I96L Instructions for installation and use manual - Page 5
5
Smeg AS28I96L Instructions for installation and use manual - Page 6
6
Smeg AS28I96L Instructions for installation and use manual - Page 7
7
Smeg AS28I96L Instructions for installation and use manual - Page 8
8
Smeg AS28I96L Instructions for installation and use manual - Page 9
9
Smeg AS28I96L Instructions for installation and use manual - Page 10
10
Smeg AS28I96L Instructions for installation and use manual - Page 11
11
Smeg AS28I96L Instructions for installation and use manual - Page 12
12
Smeg AS28I96L Instructions for installation and use manual - Page 13
13
Smeg AS28I96L Instructions for installation and use manual - Page 14
14
Instructions for the user
31
6. CLEANING AND MAINTENANCE
Before any intervention, disconnect the power supply of the device.
6.1 Cleaning stainless steel
To keep stainless steel in good condition it should be cleaned regularly
after use. Let it cool first.
6.1.1 Ordinary Daily Cleaning
To clean and preserve the stainless steel surfaces, always use only
specific products that do not contain abrasives or chlorine-based acids.
How to use: pour the product on a damp cloth and wipe the surface,
rinse thoroughly and dry with a soft cloth or deerskin.
6.1.2 Food stains or residues
Do not use metallic sponges or sharp scrapers: they will
damage the surface.
Use normal non-abrasive products for steel, and a wooden or
plastic tool if necessary.
Rinse thoroughly and dry with a soft cloth or deerskin.
6.2 Cleaning of cooking hob components
Grids, caps, flame cap crowns and burners can be
removed for ease of cleaning. Wash them in warm
water using a non-abrasive detergent, taking care to
remove all tough spots. Before remounting, allow the
components to fully dry out. Re-install the caps on
the corresponding crowns making sure that niches A
are perfectly aligned with pins B of the burners.
To work well, the ignition plugs and thermocouples must
always be very clean. Check them frequently and clean
them with a wet rag if necessary. Any dry residue should be
removed with a toothpick or a needle.