SMEG BQ90 S Instructions For The Installer
Download Instructions for the installer of Smeg BQ60 S Cooktop, Grill for Free or View it Online on All-Guides.com.
Brand: Smeg
Type: Instructions for the installer
Model: Smeg BQ60 S , Smeg BQ6030 , Smeg BQ90 S
Pages: 22 (5 Mb)
Instructions for the Installer
35
7.4 Burner, Nozzle and Gas Consumption Data Tables
Burner
Rated heat
capacity
(kW)
Bottled gas – G30/G31 30/37 mbar
Nozzle
diameter
1/100 mm
By-pass
1/100 mm
Reduced heat
capacity
(W)
Capacity
g/h G30
Capacity
g/h G31
Left 4.5 100 85 2200 327 321
Central (BQ90S) 4.5 100 85 2200 327 321
Right 4.5 100 85 2200 327 321
Ultra-rapid (BQ6030S) 3.5 94 65 1500 254 250
7.5 Check for any gas leaks
These procedures must be carried out the first time the barbecue is connected and whenever the
gas supply is disconnected and reconnected.
Once the barbecue hose has been connected to the gas supply (LPG), proceed as follows:
1 Open the gas valve on the LPG cylinder, BUT DO NOT ATTEMPT TO LIGHT THE BURNERS.
2 While there is gas pressure in the hose, check all the connections for leaks using a soap and water
solution. Never look for leaks with a naked light.
3 If there are any leaks, bubbles will appear on the poor connection from which gas is escaping.
4 Turn off the cylinder gas tap, tighten the connection which was leaking and repeat the test.
5 If the gas leaks persist, contact your nearest supplier.
NEVER CHECK FOR LEAKS WITH A NAKED LIGHT.