SMEG BQ90 S Instructions For The Installer
Download Instructions for the installer of Smeg BQ60 S Cooktop, Grill for Free or View it Online on All-Guides.com.
Brand: Smeg
Type: Instructions for the installer
Model: Smeg BQ60 S , Smeg BQ6030 , Smeg BQ90 S
Pages: 22 (5 Mb)
Instructions for the User
38
BURNER CONTROL KNOB
These knobs can be used to light the burners inside the barbecue.
To light the flame, proceed as described in point “9.3.1 Electronic burner
ignition”. Burners can also be lit by hand; see point “9.3.2 Manual burner ignition
(for internal burners only)” for further details.
UR3 BURNER CONTROL KNOB (model BQ6030S only)
This knob can be used to light the UR3 side burner (model BQ6030S only).
Useful for conventional cooking or for keeping barbecued food hot.
To light the flame, proceed as described in point “9.3.1 Electronic burner
ignition”.
This appliance is not fitted with a safety valve. It therefore must never be left unattended when in
operation. If you notice that the flames have gone out, turn the knobs to the OFF position AT ONCE and
wait a few minutes before attempting to ignite the burners again.
When the appliance is used for the first time, operate all the burners for 10 minutes with nothing on them
to burn off any oils and manufacturing residues.
WARNING: TO PREVENT COMBUSTION OF RESIDUE FROM PREVIOUS USE OF THE
BARBECUE, CLEAN THE DRIPPING PAN, BURNER COMPARTMENT, CERAMIC PLATES AND
THE BURNERS THEMSELVES BEFORE EACH USE.
WARNING: FOR BQ6030S MODELS, DO NOT EXPOSE THE APPLIANCE TO BAD WEATHER;
STORE IT INDOORS. IF ANY WATER REACHES THE BURNER CAVITY, IT MAY SERIOUSLY
DAMAGE THE APPLIANCE.