SMEG BQ90 S Instructions For The Installer
Download Instructions for the installer of Smeg BQ60 S Cooktop, Grill for Free or View it Online on All-Guides.com.
Brand: Smeg
Type: Instructions for the installer
Model: Smeg BQ60 S , Smeg BQ6030 , Smeg BQ90 S
Pages: 22 (5 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Instructions for the Installer
32
6. BEFORE INSTALLATION
7. INSTALLATION
Never leave packaging residues unattended in the home. Separate waste packaging materials by type
and consign them to the nearest separate disposal centre.
The inside of the appliance should be cleaned to remove all manufacturing residues. For further
information about cleaning, see point 12. CLEANING AND MAINTENANCE.
The product's place of installation should be chosen with care:
1 it must not be too dusty: over time, dust might clog the burners, making the appliance dangerous to
use;
2 it must offer some protection against wind: too much wind during use might prevent the appliance
from functioning correctly;
3 when the appliance is installed on its trolley, it must be placed on a flat, level surface to ensure it is
level and stable.
This product may be installed in free-standing mode, on a small table or shelf, or built into a masonry or
wooden structure. Otherwise, it may be installed on a special trolley available for separate purchase.
In all cases, the instructions provided below must be complied with.
7.1 Free-standing installation
The barbecue comes complete with 4 feet to be screwed into its four corners.
After fitting these feet and making sure the appliance is level, simply place it on any flat surface and it is
ready for use.
Never use the appliance if the feet supplied are not screwed properly into place.
This would cause an overheating hazard which might put the user's safety at risk and damage the
appliance's appearance.
The only circumstances in which the feet provided must not be fitted is when the appliance is installed on
its trolley.