Smeg 129530 Instructions For Use Manual

Download User manual manual of Smeg 129530 Dryer for Free or View it Online on All-Guides.com.

Brand: Smeg

Category: Dryer

Type: User manual manual

Model: Smeg 129530 , Smeg DRY73CS

Pages: 24 (2.41 Mb)

Download Smeg 129530 User manual manual

Smeg 129530 User	manual	manual - Page 1
1
Smeg 129530 User	manual	manual - Page 2
2
Smeg 129530 User	manual	manual - Page 3
3
Smeg 129530 User	manual	manual - Page 4
4
Smeg 129530 User	manual	manual - Page 5
5
Smeg 129530 User	manual	manual - Page 6
6
Smeg 129530 User	manual	manual - Page 7
7
Smeg 129530 User	manual	manual - Page 8
8
Smeg 129530 User	manual	manual - Page 9
9
Smeg 129530 User	manual	manual - Page 10
10
Smeg 129530 User	manual	manual - Page 11
11
Smeg 129530 User	manual	manual - Page 12
12
Smeg 129530 User	manual	manual - Page 13
13
Smeg 129530 User	manual	manual - Page 14
14
Smeg 129530 User	manual	manual - Page 15
15
Smeg 129530 User	manual	manual - Page 16
16
Smeg 129530 User	manual	manual - Page 17
17
Smeg 129530 User	manual	manual - Page 18
18
Smeg 129530 User	manual	manual - Page 19
19
Smeg 129530 User	manual	manual - Page 20
20
Smeg 129530 User	manual	manual - Page 21
21
Smeg 129530 User	manual	manual - Page 22
22
Smeg 129530 User	manual	manual - Page 23
23
Smeg 129530 User	manual	manual - Page 24
24
129530
The distance between the dryer and the moist air outlet
(vent shaft, window) should not exceed 2 meters,
otherwise water can accumulate in the tube.
B - Condenser dryer
Laundry moisture is eliminated through the water condenser
and collected in the condenser tank. You can avoid possible
interruption of drying procedure due to full water condenser if
clothes have been dried at reduced number of spin revolutions
or when drying 6/7 kg of clothes. It is recommended to direct
the condense discharge hose directly to the drain. Before
installing remove the hose from the back side of the appliance
(left under the cover).
Display reads CONTAINER FULL and a beep is heard when
the water receptacle is full and should be emptied, preferably
after each drying cycle.
Use the power cord to connect the dryer to the power supply
via wall socket.
Rated voltage and other characteristics are indicated on the
name plate, located under the door frame of the appliance.
The wall socket should always be within reach. It has to
be earthed according to the standing regulations.
If the supply cable is damaged it should only be
replaced by a quali ed technician.
Power connectionPower connection
7